SLV 1007652 Outdoor Floor Lamps Instruction Manual
- June 16, 2024
- SLV
Table of Contents
SLV 1007652 Outdoor Floor Lamps
SYMBOLS
| | | | |
---|---|---|---|---|---
1007651| 220V – 240V ~50/60Hz| GU10| 10W max| Ø 6 x 32 cm| 0,85 kg
1007652| Ø 6 x 77 cm| 1,41 kg
PARTS
INSTALLATION INSTRUCTIONS
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
SLV UK
Unit E Chiltern Park|
Boscombe Road, Bedfordshire LU5 4LT
Read manual carefully and keep for further use!
Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Operate only with intact protection glass.
The supply cord may not be covered with soil.
If the external flexible cable or cord of this luminaire is damaged, it shall
be exclusively replaced by the manufacturer or a qualified electrician to
avoid hazard.
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Additional safety advices =
Use as directed
Safety class I ( ) – Connection with protective conductor.
Operate only firmly fixed on an even surface.
Operate only on normal or not inflammable surfaces.
Do not strain mechanically or expose to strong dirt contamination.
IP65: Protection against dust (dust-tight) – Protection against jetted water
from all directions.
Admissible ambient temperature(ta): -20°C …40°C.
Lamp replacement
Disconnect luminaire from mains and let it cool down.
Suitable light sources: GU10, 10W max. Clean gasket when dirty
Care / Storage
Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Do not clean with pressure washer.
The base may not be covered (e.g. with foliage, soil, etc.)
Openings providing aeration or drainage must be kept free.
The following influences may have unwanted effects on the product: acidic
surrounding, high salt content in the air, cleaning agents, fertilizer,
thawing salt, chemicals. Store dry and clean.
Installation
Switch off mains / fixed connection cable!
Use only described accessories.
Use only suitable fastening materials.
Only suited for ground surface mounting.
Follow local regulations for outdoor installations.
Do not seal the product yourself (e.g. with silicone).
Install according to declared IP type.
Install as shown in the figure.
Electrical connection
Protect the connection applying an IP 68 connection box or cable
connector (e.g. SLV 228730).
Suitable terminal block: 400V, 16A, Pole: 3
Live conductor Conductor L
Neutral conductor Conductor N
Protective conductor Conductor (PE)
Check secure fixation and proper function!
Customer Support
© 25.07.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.