SLV 1007596 Pendant Light Installation Guide
- June 16, 2024
- SLV
Table of Contents
**SLV 1007596 Pendant Light Installation Guide
**
PART A Pendant Light
Operating Manual PART B Pendant Light
Read manual carefully and keep for further use!
Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
If the external flexible cable or cord of this luminaire is damaged, it shall
be exclusively replaced by the manufacturer or a qualified electrician to avoid hazard.
Take measures that children get not harmed by the product.
Additional safety advices ****
Use as directed
Safety class II (2) – Safety insulated – Connection without protective
conductor.
Use only in combination with a suitable track adapter or ceiling canopy.
Operate only with LED lamps.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.
Lamp replacement
**** Disconnect luminaire from mains and let it cool down. Suitable light
sources: LED, E27, 15W max.
Care / Storage
Disconnect product from mains and let it cool down. Clean external surfaces
regularly with a slightly moistened (water) cloth. Store dry and clean
Installation
**** Switch off mains / fixed connection cable!
Use only described accessories.
Use only suitable fastening materials.
Only suited for ceiling surface mounting.
Install as shown in the figure.
Electrical connection
Connect the product with a suitable track adapter (see fig.) or a suitable
ceiling canopy (see fig.). Notice supplied manuals. Connection only on load
terminal (LOAD)
**** Check secure fixation and proper function!