SLV 1002607 Wall Light Instruction Manual

: June 15, 2024
: SLV

Table of Contents

SLV 1002607 Wall Light
Product Information
Product Usage Instructions
OVERVIEW
FEATURES
INSTALLATION
INSTRUCTION
Lamp replacement
Care / Storage
Electrical connection
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SLV 1002607 Wall Light

SLV-1002607-Wall-Light-product

Product Information

Specifications

Product Code: 146692
Model Numbers: 1002607, 1002608
Socket Type: GU10
Maximum Wattage: 50W
Weight: 0.39 kg (1002607), 0.42 kg (1002608)

Product Usage Instructions

Safety Instructions

The installation of this product requires expert knowledge and should only be carried out by an approved electrician, taking into consideration local and national regulations.

Installation

Switch off the main power and disconnect the fixed connection cable before installation.
Use only the described accessories and suitable fastening materials.
This product is designed for wall surface mounting only. Install it as shown in the figure.
Note the minimum distance of 0.2m between the light source and the illuminated surface.

Electrical Connection

Equip flexible wire ends with suitable wire ferrules.
Connect the live conductor to the terminal L, the neutral conductor to the terminal N, and the protective conductor to the earth terminal.

Putting into Service

Switch on and off the product using the switch.
Check for secure fixation and proper function after putting it into service.

Lamp Replacement

Disconnect the luminaire from the mains power and let it cool down before replacing the lamp.
Use only GU10 light sources with a maximum wattage of 50W.

Care and Storage

Disconnect the product from the mains power and let it cool down before cleaning.
Clean the external surfaces regularly with a slightly moistened cloth (water).
Store the product in a dry and clean place.

FAQ

Q: Can I install the product myself?
A: No, the installation of this product requires expert knowledge and should only be carried out by an approved electrician.
Q: What type of light sources can I use with this product?
A: This product is compatible with GU10 light sources with a maximum wattage of 50W.
Q: How do I replace the lamp?
A: To replace the lamp, disconnect the luminaire from the mains power, let it cool down, and then replace the lamp with a suitable GU10 light source.
Q: How should I clean and store the product?
A: Clean the external surfaces regularly with a slightly moistened cloth (water). Store the product in a dry and clean place.

OVERVIEW

$SLV-1002607-Wall-Light-fig- $2$$

FEATURES

$SLV-1002607-Wall-Light-fig- $1$$ $SLV-1002607-Wall- Light-fig- $4$$

TOOLS REQUIRED $SLV-1002607-Wall-Light-fig- $3$$

INSTALLATION

$SLV-1002607-Wall-Light-fig- $5$$

The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!

Operating Manual PART B Wall Light

146692 1002607 …08

INSTRUCTION

Read the manual carefully and keep it for further use!
Safety advice for installation and operation.
Disregarding may lead to danger of life, burning or fire!
Any work on the electrical connection only by the electrician.
Identifies hot surfaces of the product on the product itself or on the figure.
Always use an existing handle when adjusting the direction of the luminaire.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
Take measures that children are not harmed by the product.
Additional safety advice = Use as directed
Safety class I (1) – Connection with protective conductor.
Operate only firmly fixed on an even surface.
Operate only on normal or not inflammable surfaces.
Operate only in dry indoor areas.
Do not strain mechanically or expose to strong dirt contamination.
A minimum distance of the light source to the illuminated surface: 0,2 m.

Lamp replacement

Disconnect the luminaire from the mains and let it cool down. Suitable light sources: GU10, 50W max.

Care / Storage

Disconnect the product from the mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth. Store dry and clean.

Installation