SLV 1007658 Pendant Light Instruction Manual
- June 15, 2024
- SLV
Table of Contents
SLV 1007658 Pendant Light
Product Information
Specifications
- Model: 1007658
- Type: Pendant Light
- Dimensions: 20 mm (diameter), 5 mm (height)
- Available Languages: English (EN), Dutch (NL), Russian (RU), French (FR), Italian (IT)
Product Usage Instructions
Safety Instructions
Read the manual carefully and keep it for further use. Failure to follow
these safety instructions may lead to danger of life, burning, or fire. The
installation should only be carried out by an approved electrician who has
expert knowledge and is aware of the local and national regulations. Do not
alter or modify the product, fasten anything on it, or cover it. If you
suspect a defect or malfunction, take the product out of service and contact
your dealer or a qualified electrician. Ensure that children are not harmed by
the product.
Additional Safety Instructions
- Use the product as directed.
- Safety class I (1) – Connection with protective conductor.
- Operate the product only when firmly fixed on an even surface.
- Operate the product only on normal or non-inflammable surfaces.
- Operate the product only in a dry indoor area.
- Do not strain mechanically or expose the product to strong dirt contamination.
Lamp Replacement
To replace the lamp, follow these steps:
- Disconnect the luminaire from the mains and let it cool down.
- Use suitable light sources : LED, E27, 10W max.
Care and Storage
To care for and store the product:
- Disconnect the product from the mains and let it cool down.
- Clean the external surfaces regularly with a slightly moistened cloth.
- Store the product in a dry and clean place.
Installation
To install the product, follow these steps:
- Switch off the mains/fixed connection cable.
- Use only the described accessories and suitable fastening materials.
- The product is only suited for ceiling surface mounting.
- Install the product as shown in the figure.
- Adapting the pendant cable: Loosen strain relief (A). Disconnect wires and cut the pendant cable. Connect as before (attach wire end ferrules if necessary!). Secure strain relief. Carry out a continuity test after shortening the pendant cable.
Electrical Connection
To ensure proper electrical connection:
- Equip wires of the fixed wiring with protective tubes.
- Equip flexible wire ends with suitable wire ferrules.
- Check secure fixation and proper function.
FAQ
-
Q: Can I install the product myself?
A: No, the installation requires expert knowledge and should only be carried out by an approved electrician. -
Q: What type of lamp can I use as a replacement?
A: You can use LED lamps with an E27 socket and a maximum power of 10W. -
Q: How should I clean the product?
A: Clean the external surfaces regularly with a slightly moistened cloth.
TOOLS
INSTRUCTION MANUAL PART A Pendant Light
- The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
- SLV UK Unit E Chiltern Park 7 Boscombe Road, Bedfordshire LU5 4LT
Operating Manual PART B
Pendant Light 1007658
- Read manual carefully and keep for further use!
- Safety advices for installation and operation.
- Disregard may lead to danger of life, burning or fire!
- Any works on the electrical connection only by electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children get not harmed by the product.
- Additional safety advices =
Use as directed
- Safety class I – Connection with protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Operate only in dry indoor area.
- Do not strain mechanically or expose to strong dirt contamination
© 0001 14.07.2023 SLV GmbH,
- 21-23, 52531 , Germany,
- Tel. +49 (0)2451 4833-0.
- Made in China.