SLV 1002925 Wall Light Instruction Manual
- June 15, 2024
- SLV
Table of Contents
SLV 1002925 Wall Light
Product Information
Specifications
- Power supply: 220V-240V
- Frequency: 50/60Hz
- Model: QT-DE12
- Maximum wattage: 80W
- Dimensions: 20.7 x 9.5 x 4.3 cm
- Weight: 0.56 kg
Product Usage Instructions
Safety Advices for Installation and Operation
Read the manual carefully and keep it for further use.
Disregarding the safety advices may lead to danger of life, burning, or fire.
- The installation requires expert knowledge and should only be carried out by an approved electrician, considering local and national regulations.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Operate only with intact protection glass.
- If you suspect a defect or malfunction, take the product out of service and contact your dealer or a qualified electrician.
- Take measures to ensure children do not get harmed by the product.
Additional Safety Advices
- Use the product as directed.
- Safety class I (1) – Connection with protective conductor.
- Operate only when firmly fixed on an even surface.
- Operate only on normal or non-inflammable surfaces.
- Operate only in dry indoor areas.
- Do not strain mechanically or expose to strong dirt contamination.
Lamp Replacement
To replace the lamp:
- Disconnect the luminaire from the mains and let it cool down.
- Use suitable light sources: QT-DE12, R7s 118mm, maximum 80W.
Care and Storage
To care for and store the product:
- Disconnect the product from the mains and let it cool down.
- Clean external surfaces regularly with a slightly moistened cloth.
- Store the product in a dry and clean place.
Installation
To install the product:
- Switch off the mains/fixed connection cable.
- Use only the described accessories and suitable fastening materials.
- The product is only suited for wall surface mounting. Install as shown in the figure.
Electrical Connection
To make the electrical connection:
- Equip wires of the fixed wiring with protective tubes.
- Equip flexible wire ends with suitable wire ferrules.
- Live conductor – Terminal L
- Neutral conductor – Terminal N
- Protective conductor – Earth terminal
- Check secure fixation and proper function.
Frequently Asked Questions (FAQ)
Q: Can I install the product myself?
A: No, the installation requires expert knowledge and should only be
carried out by an approved electrician.
Q: What light sources can I use for lamp replacement?
A: Suitable light sources for lamp replacement are QT-DE12, R7s 118mm, with a
maximum wattage of 80W.
Q: How should I clean the product?
A: Clean external surfaces regularly with a slightly moistened cloth.
Q: Can I operate the product on inflammable surfaces?
A: No, operate the product only on normal or non-inflammable surfaces.
INSTRUCTION MANUAL PART A
Wall Light
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
Operating Manual PART B
Wall Light
1002925 …27
Read manual carefully and keep for further use!
- Safety advices for installation and operation.
- Disregard may lead to danger of life, burning or fire!
- Any works on the electrical connection only by electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Operate only with intact protection glass.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children get not harmed by the product.
Additional safety advices =
Use as directed
- Safety class I (1) – Connection with protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Operate only in dry indoor area.
- Do not strain mechanically or expose to strong dirt contamination.
Lamp replacement
Disconnect luminaire from mains and let it cool down.
Suitable light sources: QT-DE12, R7s 118mm, 80W max.
Care / Storage
Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Installation
- Switch off mains / fixed connection cable!
- Use only described accessories.
- Use only suitable fastening materials.
- Only suited for wall surface mounting.
- Install as shown in the figure.
Electrical connection
- Equip wires of the fixed wiring with protective tubes.
- Equip flexible wire ends with suitable wire ferrules!
- Live conductor Terminal L
- Neutral conductor Terminal N
- Protective conductor Earth terminal
- Check secure fixation and proper function!
06.12.2022 © SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>