SLV 1007703 One Flat LED Pendant Light Instruction Manual
- June 15, 2024
- SLV
Table of Contents
INSTRUCTION MANUAL PART A
Pendant Light
1007703 One Flat LED Pendant Light
1007701
1007702
1007703
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.
Technical Details are subject to change.
SLV UK
Unit E Chittern Park
Boscombe Road, Bedfordsire
LU5 4LT
Operating Manual PART B
Pendant Light
1007701 …02 …03
Read manual carefully and keep for further use!
Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Do not stare into the active light source.
Additional safety advices =
Use as directed
Safety class I (1) **** – Connection with protective conductor.
Operate only firmly fixed on an even surface.
Operate only on normal or not inflammable surfaces.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.
Admissible ambient temperature(ta): -25°C …+45°C.
Light Source
The light source of this luminaire may only be replaced by the manufacturer,
an authorized service technician or a comparable qualified person.
This product contains light sources of the energy efficiency class D.
Reference control setting: 3000K
Care / Storage
Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Installation
Switch off mains / fixed connection cable!
Use only described accessories.
Use only suitable fastening materials.
Only suited for ceiling surface mounting.
Install as shown in the figure.
Adjust pendant length of the wires with the wire fixer. Adapting the pendant
cable: Push pendant cable into canopy.
Place the strain relief (A) by sliding it at a position avoiding strain on the
cable inside the canopy in case of a failure of the cable retainer.
Suitable Dimmer: DALI dimmer / light control. Note manufacturer`s
instructions.
Electrical connection
Equip flexible wire ends with suitable wire ferrules!
Live conductor Terminal L
Neutral conductor Terminal N
Protective conductor Earth terminal
Dali control wires Terminals DA
Check secure fixation and proper function!
© 0001 01.09.2023 SLV GmbH, Daimlerstr.
21-23, 52531 Übach-Palenberg, Germany,
Tel. +49 (0)2451 4833-0.
Made in China.