FLINQ FQC8297 Adjustable LED Motion Sensor Light Instruction Manual
- June 15, 2024
- FlinQ
Table of Contents
FLINQ FQC8297 Adjustable LED Motion Sensor Light
Welcome to the FlinQ family
Thanks for purchasing one of our items! To ensure continuous operation and accuracy, please read these operating instructions carefully before use and save this manual for future use. Passing certain procedures may result in incorrect reading and incorrect use of this product. We hope that you will enjoy using your new FlinQ product! If by any chance the item is damaged, defective or broken, you are covered with warranty! Please do not hesitate to contact us for any questions, concerns or suggestions at the email address as mentioned in this manual.
Register your FlinQ product
- We can imagine you want to treat your FlinQ item carefully.
- Register your product and you will be entitled to the following:
- 1 year extra warranty (2+1)
- Personal support
- Digital warranty certifi cate
- Digital manual
Scan the QR code or go to flinqproducts.nl/registration
- Please read this manual thoroughly before using the product! Keep it at a safe place for future reference. This product can be used indoors (see below for more info).
- This appliance may be used (but not installed) by children aged 12 and over, and by persons with reduced physical, sensory or mental capacities or a lack of suffi cient experience and/or knowledge, provided they are supervised or have been trained in the safe use of the appliance and understand the potential dangers.
- Cleaning and maintenance must not be carried out by children without supervision. Children must not be allowed to play with the appliance.
- Keep the packaging material away from children. There is a risk of suffocation!
- Do not allow unsupervised children to clean or maintain this device.
Warning
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children. Risk of suffocation!
- Danger due to swallowing small parts. Keep these away from children. Risk of suffocation!
- Dispose the packaging material immediately according to locally applicable regulations.
- Do not modify the product in any way. Doing so will void the warranty.
Specifications
| Battery | 400MAH, Polymer battery |
|---|---|
| Rotating | 120° |
| Light colors | Yellow 2900-3100k / white 6000- |
6500k / natural light 3300k-5300k
Sensor| Intelligent motion sensor
Dimmable| Yes
Material| Aluminum alloy + ABS plastic +
electroplating
Charging current| 5V-1A
Waterproof| No
Install the motion sensor light
Note: Please check whether the battery is fully charged for the first use
.
Place magnet
- Place the magnet in the right place with the supplied 3M tape.
Place magnetic base
- Place the adhesive base onto the magnet.
Place the light
- Now place the light on to them adhesive base.
Ready for use
- The motion sensor light is now ready for use. You can rotate the light 120°.
Functions of the light
Press the on / off button on the side of the light
On
- First press Turn on the light
Warm light
- Second press Sensor mode (light flashes)
- Press 2 times (third & fourth press) Light is always on
- Hold the button Dimming the light
Natural light
- Fifth press Sensor mode (light flashes)
- Press 2 times (sixth & seventh press) Light is always on
- Hold the button Dimming the light
Cold light
- Eight-press Sensor mode (light flashes)
- Press 2 times (ninth & tenth press) Light is always on
- Hold the button Dimming the light
Off
- Eleventh press Turn off the light
Note: In built-in sensing components, in a bright environment, the sensing state does not turn on the light.
Charging the light
- Charging: red light
- Charging complete: green light
FlinQ Commerce
- Eemweg 74 3755 LD Eemnes The Netherlands
- www.flinqproducts.nl
- info@flinqproducts.nl
References
- FlinQ Products | Gratis verzending | 2 jaar garantie | Betaal later
- FlinQ Products | Gratis verzending | 2 jaar garantie | Betaal later
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>