FLINQ FQC8304 Smart Indoor Xyro Floorlamp Instruction Manual

FLINQ FQC8304 Smart Indoor Xyro Floorlamp Instruction Manual

Welcome to the FlinQ family

Thanks for purchasing one of our items! To ensure continuous operation and accuracy, please read these operating instructions carefully before use and save this manual for future use. Passing certain procedures may result in incorrect reading and incorrect use of this product. We hope that you will enjoy using your new FlinQproduct! If by any chance the item is damaged, defective or broken, you are covered with warranty! Please do not hesitate to contact us for any questions, concerns or suggestions at the email address as mentioned in this manual.

Register your FlinQ product

We can imagine you want to treat your FlinQ item carefully. Register your product and you will be entitled to the following:

• year extra warranty (2+1)
• Personal support
• Digital warranty certifi cate
• Digital manual

Scan the QR code or go to flinqproducts.nl/registration

Safety information

Please read this manual thoroughly before using the product! Keep it in hand for future reference. Warnings alert the user to potential serious outcomes, such as injury or adverse events to the user. Cautions alert the user to exercise care necessary for the safe and eff ective use of the product. Notes contain important information that may be overlooked or missed. This product can be used indoors only (see below for more info). This appliance may be used by children aged 12 and over, and by persons with reduced physical, sensory or mental capacities or a lack of suffi cient experience and/or knowledge, provided they are supervised or have been trained in the safe use of the appliance and understand the potential dangers. Cleaning and maintenance must not be carried out by children without supervision. Children must not be allowed to play with the appliance. Keep the packaging material away from children. There is a risk of suff ocation!

Warning

• Do not allow unsupervised children to clean or maintain this device.
• WARNING! Do not leave packaging material lying around carelessly. This may become dangerous playing material for children. Risk of suff ocation!
• DANGER due to swallowing small parts. Keep these away from children. Risk ofsuff ocation!

Specifications

• Input voltage: AC 100-240V / 50-60Hz
• Rated output/input voltage lamp: DC 12V- 2A (2000mA) max with 1.5MT cable
• Control method: FlinQ APP and/or RF433 soft touch wireless remote control with color, speed and dimming function and much more
• Wireless Connection Mode: FlinQ APP CB2S Wifi + BT BLE
• Wifi control distance: +-100 meters
• Microphone pick up distance: 36Db ≤10 meters
• Product height size: 115 cm x 120 mm x 120 mm base foot
• Light color: Smart RGB Symphony colors + Cool White + Warm White chosen at any way possible
• Display index: CRI>80
• Number of lamp LED beads: 5050 RGB IC 60x + 2835 Warm white 60x + 2835 cool white 60x
• Product color temperature: warm white (2800-3200K) / white (6000-6500K) / RGB Symphony Colors
• LED life” 40000 hours max.
• Working temperature: 0 degrees celcius ~ + 45 degrees celcius
• IP Grade: IP20 (indoor use only)
• Shell material: ABS + PC + metal iron spray paint
• Lighting Symphony colors mode +/-: 232 lighting effects

Remote control

Buttons: 10x
Button function: ON/OFF, SYMPHONY START/PAUSE, SPEED +/-, BRIGHTNESS +/-, LIGHT SWITCH, SYMPHONIC MODE +/-, RING COLOR
Remote control type: RF433 radio frequency remote control
Remote control distance: up to 30 meters (open area)
Remote control power supply: 3x AAA (LR03) batteries (not included, optional)
Control quantity: One remote control can control multiple lights (only for the single colors) or 1 light selectable for your choice

European Regulatory Notice for wireless function in Europe

• Frequency Range: 433.92 Mhz + 500 Khz
• Antenna Gain: 1.8 dBi
• Max Radio Transmission power: <10dBm

This product is a lifestyle product

• Read and follow the instructions contained in this manual carefully. Keep these instructions at a safe place for future reference.
• The operating life of the product will be less if the ambient temperature is higher than 45°C or lower than -10°C.

Please note

• Choose a stable, solid and supportive surface and make sure the lamp is set correctly.
• Make sure the cables cannot cause a trip hazard.
• Make sure there is enough ventilation around the device and so not cover it at all times.
• This lamp is intended for inside use and the main power adapter and remote control is not waterproof! Keep away from water and only use indoors.

WARNING: Keep the external adapter out of reach of children. Never charge this product in moisture conditions or in the rain. Only charge it indoors, in a dry place.

• This is not a TOY, keep away from small children below 12 years.
• Do not open or disassemble the lamp or adapter yourself, this will void the warranty at all times.
• Do not disassemble, repair or modify the product by yourself as this may result into an electric shock.
• Do not look directly into the lamp beads as it could hurt your eyes.
• The led source is not replaceable.
• If the cable or adapter is damaged or broken please contact your seller for correct replacement by the manufacturer only.
• Do not stand, sit on, jump or throw with the lamp at all times.
• Do not throw this product in the air as it may cause damage by falling.
• Only use the lamp for its intended designed use as a light.
• Take good care of the product and clean it regularly.
• Never touch the plug contacts with sharp or metal objects.
• Use only the original power supply and original accessories.
• Do not use the device outdoors.
• Protect the device from special liquids and vapors.

Note

• Please note that the power port of the device should not be infiltrated by water. Otherwise, it will cause a product failure.
• Do not charge or store the product in a place below 0°C or above 40°C, otherwise the product performance will be reduced.
• It is a normal phenomenon that temperature of the adapter rises during use.

Installation of the lamp

Do not connect the power cable nor adapter to the power mains outlet yet! Please check if the lamp set is complete according the package contents as described.

Note: The power adapter input is AC100-240V 50/60Hz, 0.7A with output from DC 12V-2A (2000mA) 24W max. Keep in mind this adapter is not waterproof and needs to be used only indoors.

1. Place lamp on table
   Place the lamp pole carefully on a table that is protected by a soft cloth or towel etc
   

2. Attach the base to the lamp pole
   Take the lamp pole bottom screw side in one hand and bolt it with your other hand on the lamp foot base hole with the supplied tool and bolt. Fix it firmly but slow, carefully.
   

3. Insert cable
   Insert the USB connector cable end included into the approved adapter power connection to connect and insert it to the mains power outlet.

4. Open remote control
   To open the battery cover at the back side use a small coin to twist and open it at the side of the remote back cover.
   

5. Clean batterie contacts
   Clean the battery contact and remote contacts before installing the batteries.
   

6. Place batteries
   Install the three batteries 1 by 1 and make sure to use the correct polarity + and – inside the remote control housing
   

7. Place cover back
   Put the battery cover back into its place and make sure that all sides are correctly “clicked” and pushed inside the housing of the remote top housing.
   

Note: The remote can be used for the change of colors, to dim the light, to speed up or down, start/pause function controls and more. The remote control is not waterproof! The maximum control distance is <30 meters without obstacles and in open space.

Button explanation

1. ON/OFF
   Short press to turn on/off the light. Long press 5 seconds for code clearing/checking. When the code is successfully matched, the blue light of the lamp flashes quickly 5times, and the yellow light flashes slowly 5 times after the code is successfully cleared.
   Note: Code clearing/code matching requires holding down the key within 20 seconds after the lamp is powered on. If no operation is performed after 20 seconds, the software will exit the code clearing/code matching mode. ( see below steps 1-3).

2. Play/pause
   Short press function: When the light strip is turned on, short press to change the monochrome color or illusion static color enters automatic playback mode. When the light strip is in dynamic mode, short press the button to pause.

3. Color adjusting ring
   Short press or slide the color ring to switch colors in color light mode, and switch color temperature in white light mode.

4. Light mode
   Short press function: Short press the white light switch button to get into the light mode, the light color will switch among cool, warm and neutral light every click.

5. Timed shutdown
   Short press function: Short press the button, the white light flashes one/two/three/four/ five times that mean the light will turn off after one/two/three/four/ five hours later.

6. Mode change speed+/-
   Short press the button to change the 256 types illusory color modes and can adjust the color sequence in setting mode.

7. Music rhythm mode
   Short press function: Short press the button to get into the music rhythm mode, click the button again to switch the mode; then click color adjusting ring, white light switch and mode change speed+/- to exit. Long press Function: The controller will force the Wi-Fi pairing state, Lamp with pairing state will appear red light flashing rapidly.
   Note: When the power supply is connected, long press the “Music” button for 5-8 seconds in the power on/off state, the Internet data of the lamp will be cleared, and the WIFI pairing mode will be re-entered. Note: The music rhythm mode has the highest control power. Please exit music mode when it is not in use or it will switch to APP built-in microphone mode when using a remote control.

8. Brightness +/-
   Short press the button to adjust to 16 levels different brightness.

9. Mode change speed+/-
   Short press the button to switch to 10 levels light color changing speeds. And it can adjust LED set numbers in setting mode.

10. Microphone sensitivity+/-
    Short press the button to adjust the microphone sensitivity.

11. Indicator
    The light will turn on when the remote control is in normal operation, and if make the long press, the light will turn of only after a moment.

Use one remote control to operate 1 or more lamps at the sae time

One remote control can be used with 1 lamp OR with multiple lamps at the same time.

You can “pair” it within a range of <5 meters from the lamp(s). To pair and use the remote control with more than 1 lamp in the same/multiple rooms/spaces (optional to purchase more lamp sets separately at www.flinqproducts.nl)

Works as follows:

Note: In this process, be sure to turn off other purchased lamps FIRST before pairing. You must do this by unplugging the adapter.

Below steps 1-3 needs to be done WITHIN 20 seconds time:

1. Plug the adapter into the power outlet of the lamp you want to pair and make sure the lamp is ON.
2. Put the lamp into “color mode” by pressing the “light switch” button once if the lamp is in normal white color mode.
3. Press and hold the LIGHT SWITCH button until the lamp slowly flashes the light 5x in the color WHITE to confirm that the lamp is paired for use with more than 1 lamp.
4. Now remove the adapter OUT of the socket.
5. Repeat steps 1-3 above for any additional other lamp(s)

Note: if you are using multiple lamps (2 or more) with 1 remote control then only the normal white and static colors will work together and simultaneously to operate as well as the dim setting etc. The symphonic (moving colors) can NOT be run simultaneously as this is technically not possible and will continue to work independently

To reconnect and use the remote control with only 1 lamp in one room/area works as follows:

Note: In this process, be sure to turn off other purchased lamps FIRST before pairing. You must do this by unplugging the adapter.

1. Plug the adapter into the outlet of the lamp you want to pair and make sure the lamp is ON.
2. Put the lamp into “color mode” by pressing the “light switch” button once if the lamp is in normal white color mode.
3. Press and hold the LIGHT SWITCH button until the lamp flashes the light 5 times rapidly in the color BLUE to confirm that 1 remote control is now paired.
4. Now remove the adapter OUT of the power outlet.
5. Repeat steps 1-3 above for any additional lamp(s) to be able to use them again with 1 remote control.

Read and follow all safety instructions

• This IP20 product is suitable for indoor use.
• Please use the rated input voltage power supply of the product as mentioned on the back label.
• Do not install near a gas device or other sources with a similar heating process.
• Do not use the product outside its intended use.
• Read and follow all instructions that are indicated on the product or supplied with it.
• Keep this manual for future reference

Register / login to the FlinQ app

1. Launch the “FLINQ” Application
2. Tap “agree” to confirm the privacy policy
3. To register, enter your mobile phone number or email address.
4. Press “verification code retrieval”
5. Enter the “verification code” that was send by phone number or email address
6. Create a password and login for the new app use or go to Login if you already have an existing account.

Make sure your mobile device is running iOS 9 & higher or Android 5 & higher and Bluetooth is turned ON!

Important
Make sure that the lamp is set up, placed and powered ON during the 1st setup and within a range of 10 meters max between your mobile device and the lamp itself.

When turned ON by the adapter the red LED will quickly flash to indicate it’s ready to pair/connect by the Wifi/BLE function. TIP: If it fails to flash quickly in red pairing function, just check the remote functions described above to restore the pairing factory setting.

Tip: For users that don’t want to use the lamp by the FLINQ app, they can wait for the red led light flashing for more than 3 minutes so the lamp will be automatically working with the remote control.

Connect your smart lamp to the FlinQ app

Before plugging the unit into the mains, ensure by visual inspection that the unit is intact and has not suff ered any damage during transit.

1. Open the FlinQ app
   Open the FlinQ app on your mobile device.

2. Add the device
   Select ‘Add Device’ or the ‘+’ sign and make sure the red light on the lamp is fl ashing rapidly.

3. Select product type
   Select your product type via the light section tab. Please select the ‘FlinQ Smart Indoor Xyro Floorlamp

4. Fill in the WiFi details
   Now fi ll in the WiFi name and password to continue the installation

5. Device is being added
   The device is installed. This can take up to 2 minutes.
   

6. Device added succesfully
   The device is installed succesfully and added to your list of products. You can now control your device remotely.

7. Google Home & Amazon Alexa
   To control your device by using your voice via a smart speaker, please refer to the manufacturers instructions manual on how to enable a voice command through your device.

Notes

• If any problems, please restore the lamp to factory default and set it up again from start!
• Never connect several Wi-Fi light in series!
• Make sure the Wi-Fi networks are 2.4Ghz only during setup.
• The Wi-Fi authorization method should be set as WPA2-PSK and Encryption type as AES or set both at AUTO or newer.
• Do not exceed the total power capacity from the smart lights with the used appliances/devices!
• Wireless router cannot be set as 802.11N.
• For Google assistant and Alexa; if these cannot be found, try to disable the FLINQ function or the home skill app (for Alexa)
• If you need to fully RESET the Smart lamp follow the RESET instructions in the FLINQ app or the FAQ.
• Do not open the Smart lamp yourself
• This Smart Lamp is not a TOY, Keep away from children!
• Only use this smart lamp with earthed power outlets and not with extension cables (for charge)
• Do not use with appliances that could cause any fire in unattended use (like irons etc)
• This Smart lamp does not have any safety disconnection
• Any other use as the intended way for this Smart lamp is not validated for any warranty or liability.
• This Smart lamp is only used for private use

Instructions for use and maintenance

In case of non-use, store the product in a cool and dry place away from direct sunlight

Caution: NON-Replaceable LED lights!

Troubleshooting

Light does not turn on?

• Button use: Try to power on/off by the button remote or re-connect the USB cable connection or adapter from the main power outlet.
• Remote control not working: The RF signal maybe weak when there is a strong visible light or barrier. Normal range should be effective within 30 meters.

Or remove the old batteries by opening the battery cover and remove of the cover from the remote control. Take notice of the positive (+) and negative (-) side of the batteries, make sure that the new batteries (AAA 1,5V) is inserted the right way. Click the cover back on and dispose of the old battery responsibly.

• Not working: Is the battery full from the remote? Please replace and make sure the adapter is connected to the mains power and retry.
• Poor distance: Use it inside a range of max. 30 meters without any obstacles.

The battery runs out too quick?

• Weak battery: We suggest only to use dry alkaline batteries from A-brands.

Note: If the lamp does not work or respond at any possible way by the remote please disconnect the power adapter from the mains power outlet and wait for at least 15min and then re-connect it again.

Cleaning the device itself

• Make sure the lamp is kept dust free and clean. Clean it regularly with a dry antistatic cloth and with warm, soapy water but make sure that no water liquid can enter the lamp luminaire. Dry the lamp before turning it ON again.
• Please do not immerse the main unit in water, it is not waterproof!
• Wipe gently with a clean soft cloth (microfiber) dampened with water or a milddetergent.
• Do not use a strong irritant lotion such as gasoline, alcohol or rubber water.
• This product is designed, produced and tested in accordance with the strictest European safety directive’s and test standards.

Disposal Information

Separate collection.

This symbol means the product must not be discarded with the general household waste. There is a separate collection system for these products.

**** Batteries and rechargeable batteries do not belong in the household waste! You are required by law to dispose of used batteries and rechargeable batteries to a collection point in your municipality or city administration or to a specialist battery dealer so please return the battery/device to the collection point which will dispose of the device and/or battery properly. If the battery is built-in inside the product , open the product and remove the battery

WEEE, the waste electrical and electronic equipment directive 2012/19/EU: This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Do not dispose of batteries in your household waste. Dispose of batteries by taking them to your local recycling store or station, contact your local government office for more details. If possible please dispose the batteries separately as stated by law and let it be recycled separately or give it to your local sales store/distributor/ dealer that dispose of it correctly and free of charge at all times. By recycling, reusing the materials or other forms of utilizing old devices/batteries, you are making an important contribution to protecting our environment and use.

Disclaimer

Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential or other damage. No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying, recording or information recording and retrieval systems without the expressed written permission of the manufacturer. Our company owns all right to this unpublished work and intends to maintain this work as confidential. Our company may also seek to maintain this work as an unpublished copyright. This publication is to be used solely for the purpose of reference, operation, maintenance or repair of our equipment. No part of this can be disseminated for other purposes.
In the event of inadvertent or deliberate publication, our company intends to enforce its right to this work under copyright laws as a published work. Those having access to this manual may not copy, disseminate or disclose the information in this work unless expressly authorized by our company. All information contained in this manual is believed to be correct. Our company shall not be liable for errors contained herein nor for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This publication may refer to information and protected by copyrights or patents and does not convey any license under the patent rights of our company, nor the rights of others. Our company does not assume any liability arising out of any infringements of patents or other rights of third parties described at any time without notice or obligation. Also, content of the manual is subject to change without prior notice.

Warranty

The warranty begins on the date of purchase and expires after 24 months. The warranty period is considered to have started three months after the date of manufacturing indicated on the product or as derived from the serial number of the product. If any defect due to faulty materials and/or workmanship occurs within the warranty period, we will make arrangements for service. Where a repair is not possible or is deemed uneconomical we may agree to replace the product. Replacement will be offered at our discretion and the warranty will continue from the date of original purchase. The warranty applies provided the product has been handled properly for its intended use and in accordance with the operating instructions. This warranty is limited to the original buyer and not transferable. Support, warranty and questions information: [email protected].

This product is designed, produced and tested in accordance with the strictest European safety directive’s and test standards.

Hereby we:

Company:

FlinQ Commerce

Address:
Eemweg 74
3755LD Eemnes
The Nederland

Declare under the sole responsibility that the following equipment:
FlinQ Smart Indoor Xyro Floorlamp

Brand:
FlinQ

Product name:
FlinQ Smart Indoor Xyro Floorlamp

Barcode / EAN:
8720955003414

Product Rating:
AC 230V + DC 12V, ?? W, Class II + Class III
Antenna gain: 1.8 dBi, Operating
frequency: 433.92 MHz +- 500Khz,
Maximum radio-frequency power transmitted: -10dBm

Product type:
Digital light

Production date:
2023

Produced in:

China

Authorized signature:
Signed by:

Name:
Erwin Honing

Title:
CEO

Place:
3755LD Eemnes, The Netherlands

Date:
22-09-2023

Conform that the products mentioned are with the following safety and hazardous substances restrictions in electrical and electronic equipment requirements of the relevant European Union harmonization directives 2014/30/EU, 2014/35/EU, 2011/65/EU, 2015/863/EU and all amendments. Conformity Is guaranteed by the CE symbol. This product has been tested following harmonized standards and EU community legislation specifications, applying versions will be valid in 09-2023 2014/53/EU ( (EU) 2021/1196 ), (ROHS) Directive 2011/65/EU + (EU)2015/863 and (EU)2017/2102, REACH Regulation (EC) No 1907/2006, (WEEE) Directive 2012/19/EU, (POP/SCCP) (EU) 2019/1021 + (EU)2020/874 and (EU)2020/1204, GS 2019:01 (PAK), 94/62/EG + 2005/20/EC + (EU) 2018/852, 2009/125/EC > (EU) 2019/2020 >>> Amending (EU) 2021/341, 874/2012 > (EU) 2019/2015 >>> Amending (EU) 2021/340 The full text of the EU declaration of conformity is available at the following internet address: www.flinqproducts.nl

TECHNICAL CHANGES SUBJECT TO FURTHER DEVELOPMENTS

EN 55032:2015/A11:2020
EN 55035:2017+A11:2020
ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-3 V2.1.1 (2019-03)
ETSI EN 301 489-17 V3.2.4 (2020-09)
ETSI EN 300 328 V2.2.2 (2019-07)
ETSI EN 300 220-1 V3.1.1 (2017-02)
ETSI EN 300 220-2 V3.2.1 (2018-06)
EN 62479-2010
EN 50663: 2017
EN IEC 60598-1:2021
EN IEC 60598-2-1:2021
EN IEC 55015:2019+A11:2020
EN IEC 61547:2023
EN 61000-3-3:2013+A1:2019+A2:2021
EN IEC 61000-3-2:2019+A1:2021
(EU)2019/2020
(EU)2019/2015
(EU)2021/340
(EU)2021/341
IEC 62321-5:2013

IEC 62321-4:2013+AMD1:2017
IEC 62321-7-1:2015
IEC 62321-7-2:2015
IEC 62321-6:2015
IEC 62321-8:2017
IEC 62321-7-2:2017
(EC) No 1907/2006
(EU) 2019/1021
2012/19/EU
AfPS GS 2019:01 PAK

FlinQ Commerce
Eemweg 74
3755 LD Eemnes
The Netherlands
www.flinqproducts.nl
[email protected]

References

• FlinQ Products | Gratis verzending | 2 jaar garantie | Betaal later
• FlinQ Products | Gratis verzending | 2 jaar garantie | Betaal later

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>