beper P101TEM001 Buffet Warmer Steel

June 4, 2024
beper

BUFFET WARMER
user manual

P101TEM001 Buffet Warmer Steel

For further information and/or for instructions for use in other languages, please visit: beper.com

beper P101TEM001 Buffet Warmer Steel - 1 **Cod.: P101TEM001
Class

**

Precautions

Read the following instructions carefully, since they give you useful safety information about installation, use, and maintenance and help you avoid mishaps and possible accidents.
Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from dangerous sources. It is recommended not to throw these packing materials in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information from the manager of the Sanitation Department of your own municipality.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.
The appliance can be damaged if the voltage is not correct. If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance’s power absorption.
Generally, the use of adaptors of multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptors are not exceeded.
Do not use the appliance if the cable or the plug shows any damage. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beer after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance. This appliance is to be destined for its special purpose only. Any other use is to be considered improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong, or incautious use.
This appliance is for household use only. To protect against electric shock, do not immerse the cord, plug, or any parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable materials, gases, or burning flames.
Do not allow children, disabled people, or people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance is used by or near children.

Important safety instructions

The manufacturer is not responsible for any damage and injury resulting from ignoring the safety instructions. Place the appliance on a stable, flat, and heat-resistant surface. Never leave the appliance unattended when connected to the power supply.
This appliance is for domestic use only and must be used only for its intended purpose.
To protect children from the dangers of electrical equipment, never leave the appliance unattended. Therefore place the appliance in a place that is not accessible to children. Do not leave the cable hanging down.
This appliance must not be used by children. The operation of this appliance does not require the use of an external timer or a separate remote control.
The temperature of accessible surfaces can be high when the appliance is running.

Description of the product Fig. A

  1. Lids
  2. Containers
  3. Metal trays holders
  4. Heating plate
  5. Indicator light
  6. Thermostat knob
  7.  Handles

Before first use
Take the appliance and accessories out of the box. Remove the stickers, protective foil or plastic from the device. Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around the device. This device is not suitable for installation in a cabinet. Before using the appliance for the first time, clean the lids, trays, and tray holders as indicated in the “cleaning and maintenance” paragraph. When the device is turned on for the first time, a slight odor will occur. This is normal, ensure adequate ventilation. The odor is only temporary and will disappear soon. We suggest placing a heat-resistant coating between your table and the appliance (this way you don’t get burn marks on your table or tablecloth).

Use

Place the metal tray holder base on the heating plate then place the tray.
Turn the thermostat knob clockwise until you reach the desired position. The red light turns on, and when the desired temperature is reached the light turns off. During use the light turns on and off, this is normal. The food can be kept warm for up to 6 hours, after this time the food can become dry and lose its original taste.
The product can also be used without the metal tray holder, simply by placing heat-resistant containers on the heating plate.
The heating plate is very hot.
Cleaning and maintenance
Before carrying out any cleaning and/or maintenance operation, unplug the appliance and let it cool down.
Use a slightly damp soft cloth to clean all surfaces.
Never use abrasive products.
Do not allow water or other liquids to enter the appliance.
The trays and lids are suitable for washing in the dishwasher.

Technical data

Power: 300W
Power supply: 230V, 50/60Hz, Class I
For any improvement reason, Beer will reserve the right to modify or improve this appliance without notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed-out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.

GUARANTEE CERTIFICATE

This appliance has been checked in the factory. From the date of original purchase, a 24-month guarantee applies to material and production defects. The purchase receipt and
the guarantee certificate must be submitted together in case of a claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance
For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance’s efficiency and NOT void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on the condition that:

  • The appliance has been used properly and for the purpose for which it has been intended.
  • The appliance has not been tampered with, otherwise, it is not maintainable.
  • The purchase receipt shall be presented.
  • The appliance showing fair wear and tear shall not be covered by this guarantee.

Therefore, any part that could be accidentally broken or has visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beer reserves the right to replace only the very part in question and not the entire product
Contact your distributor in your country or after-sales department Beer.
E-mail assistenza@beper.com which will forward your inquiries to your distributor.

CUSTOMER CARE BEPERhttp://customercare.beper.com/support/home
BEER SRL
Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona
Tel. 045/7134674 – Fax 045/6984019
beper.com

Documents / Resources

| beper P101TEM001 Buffet Warmer Steel [pdf] User Manual
P101TEM001, Buffet Warmer Steel, Warmer Steel, Buffet Warmer, Warmer, P101TEM001
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals