ALPHA AF01 Bluetooth Voice Remote Control User Manual

ALPHA AF01 Bluetooth Voice Remote Control

Product Information

Specifications

• Compliance: Part 15 of the FCC Rules
• Interference: This device complies with the following two conditions:

1. No harmful interference may be caused by this device.
2. This device must accept any interference received, including  

interference that may cause undesired operation.

Product Usage Instructions

Accessing Prime Video
To access Prime Video on this device, follow the steps below:

1. Connect the device to the internet.
2. Ensure you have an active Prime Video subscription.
3. On the device’s home screen, locate the Prime Video app.
4. Launch the app by selecting it and pressing the appropriate button on the device’s remote control.
5. You will be prompted to sign in to your Amazon Prime Video account. Enter your credentials and sign in.
6. Once signed in, you can browse and stream content on Prime Video.

Frequently Asked Questions (FAQ)

• Q: What is Part 15 of the FCC Rules?
  A: Part 15 of the FCC Rules sets forth regulations concerning the operation of radio frequency devices in the United States. It ensures that these devices do not cause harmful interference to authorized communications and must accept any interference received.

• Q: Can I make changes or modifications to the device?
  A: No, any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. It is recommended to use the device as intended and avoid any unauthorized modifications.

TV REMOTE HANDLING MANUAL
Thank you for choosing our remote control. Before using this product, please read this manual to ensure it is used correctly.

Overview

How to pair the remote with your Fire TV Device

If you have the old remote and still can use it, you’ll need both remotes for setup:

1. Turn on your TV and Fire TV Device.
2. Using your old remote navigate to Settings at the top of the screen, then select: ControlIers & Bluetooth Devices > Amazon Fire TV Remotes > Add new remote. (If connected remote more than 6 limits, please delete some remotes)
3. On the new remote, press and hold the button for 10-15 seconds to connect the new remote.
4. Your Fire TV device will search for remotes it can connect with, and then display them in a list.

If you don’t have the original remote that came with your Fire TV:

1. Turn on your TV.
2. Unplug your Fire TV device from the power cable, and restart it.
3. Once the home screen for Fire TV appears, press and hold the button on the new remote for 10-15 seconds.
4. The indicator LED will slowly flash amber for 10 seconds, then flash faster when your remote is ready to connect.

Note: If fail in the pairing, please repeat again.

Installing batteries into the remote

1. To install the batteries, push the rear cover open in the direction of the arrow at the bottom of the illustration.
2. Insert the batteries as shown in the figure. Make sure that the positive and negative ends are facing in the correct direction.
3. Close the rear cover as shown.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warming for Portable devices:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>