FUFU GAGA KF020455-01 63 Inch Wide Hall Tree with Bench and Shoe Storage Installation Guide

KF020455-01 63 Inch Wide Hall Tree with Bench and Shoe Storage

“`html

Product Specifications:

• Model: 020455-01-24A-JM

• Tools Required: A, B, C, D, E, F, G, H, J, K, L, M, N, P, Q, R,
  S, T, U, V, CL, CR, DL, DR

• Dimensions: Various sizes as per manual

• Material: Not specified

• Weight Capacity: Not specified

Product Usage Instructions:

1. Important Information:

Read the entire manual before assembling and using the product.
Follow the instructions carefully and keep the manual for future
reference.

2. Avoid Scratches:

To prevent scratches, assemble the furniture on a soft surface
like a rug.

3. Improve Efficiency:

Consider finding a partner to help with installation to speed up
the process and improve efficiency.

4. Anti-Topple Warning:

Ensure to use the wall attachment provided to prevent tipping
over. If not included, purchase a suitable wall attachment and seek
professional advice if unsure.

5. Installation Instructions:

Follow the manual for the specific number and type of tools
required for installation. Match each screw to the corresponding
step in the manual.

6. Safety Precautions:

• Always install the Anti-tip device provided.

• Do not place a TV on the product.

• Avoid allowing children to climb or hang on drawers, doors, or
  shelves.

• Open only one drawer at a time.

• Store heaviest items in the lowest drawers.

7. Product Assembly:

Follow the step-by-step instructions in the manual for
assembling each component using the specified tools.

Frequently Asked Questions (FAQ):

Q: What should I do if I don’t have the wall attachment?

A: If the wall attachment is not included, purchase a suitable
one that fits your wall and seek professional advice if needed to
ensure proper installation.

Q: Can I put a TV on the product?

A: No, never put a TV on this product as it is not designed to
support the weight of a television.

“`

Version: 020455-01-24A-JM

IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference.
AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug.
IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.
ANTI-TOPPLE WARNING !
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fit your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.
IMPORTANT !
It is important that any product which is assembled using any kind of screw is re-tightened 2 weeks after assembly,and once every 3 months – in order to assure stability through-out the lifespan of the product. For regular maintenance and cleaning of the product, for the frame, please use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag.For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag. Do not use an electric screwdriver, and do not use too much force when installing, because the board is easy to break.
2/49

Please prepare the following tools

A x 98

B x 98

When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size

C x 85

D x 16

E x 24

6 x 35 mm F x 24

15 x 9.5 mm G x 40

6 x 30 mm H x 5

4 x 35 mm J x 10

3 x 16 mm K x 8

L x 72

3.5 x 12 mm M x 2

4 x 40 mm N x 2

4 x 45 mm P x 2

Q x 40

4 x 12 mm R x 10

S x 20

T x 4

4 x 12 mm U x 4

V x 8

CL x 4

4 x 16 mm CR x 4

DL x 4

DR x 4

3 x 16 mm

300 mm

300 mm

300 mm
3/49

300 mm

1

14 5

12

14 12

15
11
3 41

4

13

12

13 32
31

13

40

2

12

13

29

18

10

16

6

22 21

9

16

16

20

17

18 16

8 28

16

7

16

23

17

19

25 27 24
23
34

19
35 36
35 36
38

39
ALWAYS install Anti-tip device provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers.
This is a permanent label. Do not remove!
4/49

30
33 26
37
x4

1

A x 8 6 x 35 mm

Screw eccentric rod(A) into board 3 and 2 with a screwdriver as shown.
A A
A A
2

A

3

A

A A

A

3

5/49

2

B x 8

C x 8

15 x 9.5 mm

6 x 30 mm

Connect board 2 and 3 to board 13 using wooden dowel(C), add cam lock(B) into board 13 and turn clockwise to tighten as shown.

C C
2

C BC
13

B

B
13

B

B

C

C

B

3
C BC
B

C

13

3

180° B

6/49

3

A x 4 6 x 35 mm

3

A

Screw eccentric rod(A) into board 3 as shown.

A

A A

A

3

7/49

4

A x 8 6 x 35 mm

Screw eccentric rod(A) into board 4 and 5 as shown.
A

A A

A

5

A A

4

A

A
4
A

8/49

5

B x 8

C x 8

15 x 9.5 mm

6 x 30 mm

Connect board 4 and 5 to board 13 using wooden dowel(C), add cam lock(B) into board 13 and turn clockwise to tighten as shown.

4
C CB
B

C CB
B

13
B

13 B
B

B C C

C C
5

C

4

13

180° B

9/49

6

A x 4 6 x 35 mm

Screw eccentric rod(A) into board 4 as shown.

4

A

A A

A

A

4

10/49

7

A x 2

B x 2

C x 1

6 x 35 mm

15 x 9.5 mm

6 x 30 mm

Screw eccentric rod(A) into board 11 as shown. Attach board 41 to board 11 using wooden dowel(C), add cam lock(B) into board 41 and turn clockwise to tighten as shown.

11
A

A
11
A

41
180° B
11
11

41
C B

11/49

B
41
C
11

8

B x 8

C x 6

15 x 9.5 mm

6 x 30 mm

Connect the two components to board 11 and 41 using wooden dowel(C), add cam lock(B) into board 11,41 and turn clockwise to tighten as shown.

B B

B C C

C

B

4

41 11

B

B

C

C

BC

3

B

4

C

11
B

180°

12/49

9
Insert back board 15 along available grooves as shown.

15

4

3

13/49

A x 8

B x 8

C x 8

10

6 x 35 mm

15 x 9.5 mm

6 x 30 mm

Screw eccentric rod(A) into board 1 as shown. Covre board 1 to the top using wooden dowel(C), add cam lock(B) into board 2,3,4,5 and turn clockwise to tighten as shown.

A

A

1

A A
A

A

1

A

A

180°

A

1

1
C
3
180° B

C BB C
2

C
C
B B
3

CB B C
4

C C
5
BB

14/49

11

C x 8 6 x 30 mm

J x 8 4 x 45 mm

Insert back board 14 along
available grooves as shown. 5

4 3 2
14
J
6
2C

Attach board 6 to board 2 and 3;

14

board 40 to board 4 and 5 using

wooden dowel(C), and fix with

screw(J) as shown.

J
J J
J6

C

C

C

C
3

2

J
J J
40
J

C

C

C

C
5

4

15/49

12

A x 8 6 x 35 mm

Screw eccentric rod(A) into board 7 and 8 as shown.

A
7

A
7
A A
A

A
8
A A
A
16/49

13

A x 1 6 x 35 mm

B x 1 15 x 9.5 mm

C x 2 6 x 30 mm

Screw eccentric rod(A) into board 17 as shown. Attach board 19 to board 17 using wooden dowel(C), add cam lock(B) into board 19 and turn clockwise to tighten as shown.

A
17

A
17

19
BC C
17

19
C B
17 180°

17/49

14

B x 8 15 x 9.5 mm

C x 6 6 x 30 mm

Connect board 7 and 8 to board 17 and 19 using wooden dowel(C), add cam lock(B) into board 17,19 and turn clockwise to tighten as shown.

8
C

C

19
B BB C

C

B 17

7

C BB

B

C

B
C

17

8

180° B

18/49

15

G x 6 3.5 x 12 mm

CL x 2 300 mm

G

G

G

CL

Insert back board 18 along available grooves as shown. Fix rail(CL) to board 8 with screw(G) as shown.

18

G
8
CL

8 7
17

G

8

GG

G

CL G G

CL

19/49

16

A x 8 6 x 35 mm

8

A

Screw eccentric rod(A) into board 8 as shown.

A

A
8

A A A

AA A

20/49

17

A x 8 6 x 35 mm

A
10

Screw eccentric rod(A) into board 9 and 10 as shown.

A
10
A A
A

A
9
A A
A
21/49

18

A x 1 6 x 35 mm

B x 1 15 x 9.5 mm

C x 2 6 x 30 mm

Screw eccentric rod(A) into board 17 as shown. Attach board 19 to board 17 using wooden dowel(C), add cam lock(B) into board 19 and turn clockwise to tighten as shown.

A
17

A
17

19
BC C
17

19
C B
17 180°

22/49

19

B x 8 15 x 9.5 mm

C x 6 6 x 30 mm

Connect board 9 and 10 to board 17 and 19 using wooden dowel(C), add cam lock(B) into board 17,19 and turn clockwise to tighten as shown.

9
C

C

B

19

C BB

C
17 B

BB C

10

B

C

B
C

9

17

B 180°

23/49

20

G x 6 3.5 x 12 mm

CR x 2 300 mm

G

Insert back board 18 along available grooves as shown. Fix rail(CR) to board 9 with screw(G) as shown.

G9 CR

G

G

CR

18 9
10 17

G

G

9

GG

G CR G
CR

24/49

21

A x 8 6 x 35 mm

Screw eccentric rod(A) into board 9 as shown.

A A A

A
A A A

9
A
A
9

25/49

22

G x 12 3.5 x 12 mm

CL x 2 300 mm

CR x 2 300 mm

G

G

G

CL

G

G

G

CR

Fix rail(CL) to board 27 with screw(G) at first. Flip to back, fix rail(CR) as shown.

G
27

G

G

G

CL

G

G CL

27
G
CL

180°

G

G 27
G

G

G

CR

CR G

26/49

23

A x 2 6 x 35 mm

C x 2 6 x 30 mm

H x 3 4 x 40 mm

Attach board 21 to board 22 using wooden dowel(C), and fix with screw(H) as shown. Screw eccentric rod(A) into board 22 as shown.

22
C
21
H
A

22

21

C

C H

H H

180°

A
22

A

22
27/49

24

B x 2 15 x 9.5 mm

C x 2 6 x 30 mm

Attach board 27 to board 20 using wooden dowel(C), add cam lock(B) into board 27 and turn clockwise to tighten.

180°

27

B C

22

B

27

C
B C

22

28/49

25

A x 4 6 x 35 mm

C x 2 6 x 30 mm

H x 2 4 x 40 mm

Screw eccentric rod(A) into board 24 and 25 as shown. Attach board 24 and 25 to board 27 using wooden dowel(C), and fix with screw(H) as shown.

A
A
24

A
24
A

A
25

H

24

H

C

25

C

27

H
24
C
27

29/49

26

B x 4 15 x 9.5 mm

C x 2 6 x 30 mm

Attach board 23 to board 24 and 25 using wooden dowel(C), add cam lock(B) into board 23 and turn clockwise to tighten as shown.
23

180° B

23
C
24

24 23

B B

C 24
B B

23 C 25

30/49

27

B x 8 15 x 9.5 mm

C x 7 6 x 30 mm

Attach the component to board 8(assembled in step 16) using wooden dowel(C), add cam lock(B) into board 21,22,24,23,25 and turn clockwise to tighten as shown.

180°

C

B

22

8 22

B

C

C

B

CB B

8

CC

BB

C

C

B

24 23
25 23

31/49

28
Insert back board 28 along available grooves as shown. 28
32/49

29

B x 8 15 x 9.5 mm

C x 7 6 x 30 mm

Attach the component to board 9(assembled in step 21) using wooden dowel(C), add cam lock(B) into board 21,22,24,23,25 and turn clockwise to tighten as shown.

9
C 180°
22 B
9

22
24 23

C

C

C

B

C C

B BB B C
BB C

25
B
23

33/49

30

A x 8 6 x 35 mm

Screw eccentric rod(A) into board 6 and 40 as shown.

A A
A
A
40

A
40
A A
A A
6

34/49

31

B x 8 15 x 9.5 mm

C x 8 6 x 30 mm

Connect the two assembled components using wooden dowel(C), add cam lock(B) into board 7,8,9,10 and turn clockwise to tighten as shown.

40
C

180°

B

10

40 C

C

C

B B

C

9B

10

B
6C

C

C

BB

C

8

BB
7

35/49

Q x 40
32

Insert layer pin(Q) into board 2, 3, 4, 5, 7, 8, 9 and 10 as shown. x 40

5
Q

Q Q
Q Q

2
Q
Q

3
Q Q

Q Q
Q Q
7Q
Q

Q
Q8
Q
Q
Q Q

Q Q
Q Q

Q Q

5
Q Q

4

Q

Q

Q

Q

9 Q

Q 10

Q Q
Q

Q

20

Q

Q

36/49

33
Then place shelf board 12 and 16 in as shown.

12 3
2
12

8 16

7

16

16

12 5
12 4

10

9

16

16

16

37/49

34

A x 16 6 x 35 mm

38
D D
39

B x 16

D x 16

R x 4

15 x 9.5 mm

4 x 35 mm

Fix board 38 to board 26 and 39 with screw(D).
D D

38 26

S x 8 4 x 16 mm

D

D

39

x4

Insert bottom board 37 along grooves as shown.

A
35 36

Screw eccentric rod(A) into board 35 and 36.
A A

26 38
39 37
x4

A A

35 36
x4

Fix handle(R) to board 35 and 36 with screw(S).

Attach board 35/36 to board 26 and 39, add cam lock(B) into and turn clockwise to tighten as shown.

39
B
180° B
35 36

39
B B
38/49

S S 35 36
R
B
26
B
S 35 36
S
R
x4

G x 16

DL x 4

DR x 4

35

3.5 x 12 mm

300 mm

300 mm

G

G

DL

G

G

DR

Fix runner(DL) and (DR) to board 39 and 26 with screw(G) as shown.
G

G
DL G
39

DR

G

26
x4

DL G
39
39/49

36
Pay attention to the difference between the middle parts of the two types of door hinges .
· The full coverage door hinges(K) are used on the outermost door plates
· And the curved door hinges(T) are used on the door panel in the middle of the cabinet.

T

K

40/49

K x 8

L x 16

R x 4

S x 8

37

4 x 12 mm

4 x 16 mm

T

K

LL K
S S

L L
29
LL

K
Fix hinge(K) to board 29,
30, 33 and 34 with screw(L)
as shown.
LL

K

29

K

S S
R

R LL
K
34

LL K

S S
30
R

LL
Fix handle(R) with screw(S).
K LL

S

S

LL

34

R

K

K S
S
33
R

41/49

38

L x 32 4 x 12 mm

T

K

Assemble door 29 to board 2; door 30 to board 5; door 34 to board 7; door 33 to board 10 by fixing hinge with screw(L) as shown.
Lx4

5
K Lx4
30

Lx4

2

29

Lx4

Lx4
7 34
Lx4

30
Lx4
5
Lx4
10 33
Lx4
42/49

L x 8

R x 2

38

4 x 12 mm

S x 4

T x 4

4 x 16 mm

Fix hinge(T) to board 31 and 32 with screw(L) as shown. Fix handle(R) with screw(S).

T

K

L L

L

T

L

S

31

S

R

T
L L T
31

L L

S S

L L
T

31
T

32

S

S

R

R
43/49

40

L x 16 4 x 12 mm

Assemble door 31 to board 3; door 32 to board 4 by fixing hinge with screw(L) as shown.

Lx4
32
Lx4

Lx4
3

Lx4

31

4

4

Lx4

32

44/49

41

M x 2

P x 2

4 x 12 mm
Fix part(M) to board 1 with screw(P) as shown.

P

P

M

1

P

1

M

35

36

35

36

45/49

Align rails, insert all drawers in.

42

E x 24 3 x 16 mm

F x 24

Insert buckle(F) into back slots and fix with screw(E) as shown.

15

F

F

E E

F

F

E

E

F E

F

F

E

E

F E

14

F

14

F

E

F

E

E

F E

18

F

F

E

F

F

F

E

E

F

FE F

E

E

28

E

E

18

F E

F

F

E

F

E

E
46/49

F E
14

V x 8

U x 4

43

3 x 16 mm

41

U

V

V

Fix hook(U) to board 41 with screw(V) as shown.

47/49

43
If there is misalignment after you install, adjust the screw to the best condition If doors are still not aligned if the hinges are properly correctly, please watch the video. https://youtu.be/n0Lb36SoODM
49/49

J x 2

N x 2

44

4 x 45 mm

Install anti-tipping device as shown.

N J
1

N J

N J
1

3. N

4. J M

48/49

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>