ALPHA WORKS AW-W38 Bluetooth Speaker User Manual
- May 15, 2024
- Alpha WORKS
Table of Contents
ALPHA WORKS AW-W38 Bluetooth Speaker
USER MANUAL
1. Precautions
- Please read the instructions first.
- Please follow the instructions carefully.
- Please store and use this product at room temperature.
- Do not use this product near heat sources such as radiators. heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not block the opening of the music player, and do not insert objects into the ven ts or slots of the music player.
- Do not throw or drop the product to avoid damage.
- Please charge the music player with product rated voltage.
- If the connection line does not match your device, please contact the dealer.
- Please keep the volume of the music player moderate to avoid temporary or permanent hearing impairment.
- No matter how the equipment is damaged it must be repaired by a qualified technician. Unauthorized disassemblyvvill void the \•1arranty.
- Batteries should be replaced by qualified technicians in order to avoid dangers associated vvith improper replacement.
- Do not disassemble. puncture. compress or throw battery into fire. If swelling occurs, do not continue to use battery. Do not place battery in high temperature environments. Do not use after the battery is soaked in water.
- Batteries (battery packs) should not be exposed to conditions such as sunshine. fire or similar excessive heat conditions. If a power adapter is used to charge the unit, ensure to use a supporting power adapter that has obtained CCC certification and meets the standard requirements.
2. Packing Details
3. Button Function
4. Interface Function
5. Bluetooth Connection
1. Go to Bluetooth Pairing Mode
Power on the speaker, press and hold M button for 2 seconds to go to Bluetooth
pairing mode, then the indicator of M button will flash quickly.
2. Connect with devices
Go to the Bluetooth list on your smart device and find “Alpha Works AW-W38” to
confirm connection .
You will hear the confirmation sound and the indicator of M button stays.
Tips:
- Press and hold the M button for 5 seconds to disconnect with thecurrent device and clear the paired list
- The speaker can connect with 2 smart devices at the same tirne.
6. TWS Connection
1. The master speaker initiating connection
Power on one speaker and switch to Bluetooth mode, short press “V+” & “V-” at
the same time ,the speaker will go to TWS mode and search the slave speaker
after you hear a confirmation sound.
2. The slave speaker initiating connection
Power on the slave speaker and switch to Bluetooth mode, short press M button
for 2 seconds to switch to pairing mode ,wait for the connection from the
master speaker.
3. TWS connection
The master and slave speaker will connect successfully and with a confirmation
sound. The indicator of the master speaker vvill indicate the Bluetooth
status, the blue indicator of the salve speaker will stay.
4. TWS disconnection
Short press “V+” & “V-” at the same to disconnect from TWS mode.
Tips:
- The master speaker is the left channel, the slave speaker is the right channel.
- A TWS set only support 2pcs speakers.
- Press the buttons on either speaker will have synchronousoperation.
7. Technical Specification
Product Size: 162 x 84 x 83mm
Product Weight: 700g (Built-in batteryincluded)
Basic Parameters
Speaker Type| Bluetooth Speaker
Power Supply| Charge about3 hours by using a DCSV-2Aadaptor
Technical Parameters
Speaker Unit| 2’2.25 inch fuII-range speaker unit++130″56mm passive radiator
Frequency Response| 65-20KHZ
Bluetooth Version| Bluetooth 5.3
Battery Capacity| 4400mAh / 3.7V