PEAK Optix Plus Wiper Blades Instruction Manual
- June 3, 2024
- PEAK
Table of Contents
PEAK Optix Plus Wiper Blades Instruction Manual
WARNING: Failure to properly install wiper blades may cause the blades to not work properly or detach. Follow all instructions carefully and use only the correct adapter for your vehicle. After installation, check to ensure the blades are securely attached.
Scan for PEAK® wiper blade product information and installation videos or visit PEAKauto.com
Identify your vehicle’s wiper arm and follow the instructions. Remember to remove the plastic rubber protector before installation.
To determine the size of your Push Button wiper arm, use a penny or ruler below to measure. A penny will fit firmly into the end of the 22mm wiper arm but will not fit into the end of the 19mm wiper arm.
Identify your vehicle’s wiper arm and follow the instructions. Remember to remove the plastic rubber protector before installation.
To determine the size of your Push Button wiper arm, use a penny or ruler below to measure. A penny will fit firmly into the end of the 22mm wiper arm but will not fit into the end of the 19mm wiper arm.
To determine the size of your Side Pin wiper arm, use a penny or ruler below to measure. A penny will fit firmly into the end of the 22mm wiper arm but will not fit into the end of the 17mm wiper arm.
To determine the size of your Side Pin wiper arm, use a penny or ruler below to measure. A penny will fit firmly into the end of the 22mm wiper arm but will not fit into the end of the 17mm wiper arm.
PRODUCT QUESTIONS OR COMMENTS CONTACT TECHNICAL SUPPORT:
PEAK, PEAK & Mountain Graphic, and OPTIX are trademarks
800-477-5847
owitech@owi.com
PEAK, PEAK & Mountain Graphic, and OPTIX are trademarks of Old World Industries, LLC. ©2022 Old World Industries, LLC. All Rights Reserved.
Read More About This Manual & Download PDF: