XGIMI Firmware Updating from USB Disk Installation Guide
- June 9, 2024
- XGIMI
Table of Contents
XGIMI Firmware Updating from USB Disk
Necessary Components
-
USB disk (FAT32 Format)
-
PC
-
Projector (Models support firmware updates)
Update Steps
How to perform a force brush
-
Download the firmware via the provided link from a PC and copy it to any USB disk; Note: (It should be formatted to FAT32)
-
Plug the USB disk into the projector’s USB 2.0 port;
-
With the projector in Off mode (please don’t turn on the projector), long-press the “power” button on the projector for 5-7 seconds, and release it when you hear the fan operating strongly.
-
You’ll see an Android robot and a progress bar; Then, the system will update automatically.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>