MUBVIEW Bel-7 SMART VIDEO DOOR BELL WIRELESS WIFI OUTDOOR SECURITY User Guide
- June 5, 2024
- MUBVIEW
Table of Contents
- MUBVIEW Bel-7 SMART VIDEO DOOR BELL WIRELESS WIFI OUTDOOR SECURITY
- Warranty Service
- What’s in the Box
- Meet the Doorbell
- Meet the Chime
- Download and Install App
- Account Registration
- Add Camera to App
- Charge your doorbell
- Prior to the doorbell installation, please charge up your doorbell for
- Pair With Your Indoor Chime
- Install Your doorbell
- Tamper Alarm
- Product Specifications
- Documents / Resources
MUBVIEW Bel-7 SMART VIDEO DOOR BELL WIRELESS WIFI OUTDOOR SECURITY
Warranty Service
Thanks for your shopping and trust.
We have been optimizing our products and improve our lifetime customer service
to offer you a better shopping experience. If you have any problems, please
feel free to send us an E-mail. We will solve your problems within 24 hours.
In addition, your advice or suggestions will be much appreciated and welcomed.
Register via link below to get 3 Years Warranty Extension.
http://bit.ly/zuReg
Product Service
Email: Support@mubview.com
Distributor: distributor@zumimall.com
More About Us
Web :www.zumimall.com
Facebook:
www.facebook.com/zumimalloffice
Amazon Store: www.amazon.com/zumimall
Brand Story
Founded in 2008, Zumimall focuses on the design and research of intelligent
security technology. Zumimall insists on taking consumer needs as its core and
strives to create smart home products that lead a global home fashion trend
for consumers. Zumimall believes that craftsmanship creates top quality and
technology changes life. With high-quality products and first-class service,
Zumimall won the love and trust of millions of customers as soon as it went
public. Over the years, Zumimall has served 45 continents of America, covering
80% of the population. Zumimall is the provider of a smart lifestyle and a
guardian of the wonderful moments of your life.
What’s in the Box
- Doorbell * 1
- Ding Dong *1
- Quick User Guide *1
- USB Cable *1
- Screws Set/Screwdriver *1
- 3M Tape *2
NOTE:
Micro SD card and power adapter are not included.
Meet the Doorbell
-
Camera
-
PIR Motion Sensor
-
Microphone
-
Doorbell Button
-
LED Indicator
-
Charging Indicator
-
Micro USB Port(for battery charging)
-
MUBVIEW Bel-7 SMART VIDEO DOOR BELL WIRELESS WIFI OUTDOOR SECURITY 45
Meet the Chime
- Settings
- Volume Control
- Select Ringtone
- Blue indicator
- Red
- AA Batteries
- Please mind the battery polarities while installing the batteries.
Download and Install App
Download ZUMIMALL App from Google Play™ or App Store™. Or scan the QR codes as
below, with your smart phone.
NOTE:
Google Play™ is a trademark of Google Inc.
App Store™ is a service mark of Apple Inc.
-
iOS
-
ZUMIMALL
-
Android
NOTE:
Please turn on both of the following permissions.
-
1. Allow ZUMIMALL App to access mobile cellular data and wireless LAN, otherwise it will fail to connect the camera.
- Allow ZUMIMALL App to receive pushed messages, otherwise, the phone will not receive alarms when motion is detected.
Account Registration
New user needs to sign up ZUMIMALL App with email address. Click ‘Sign up’ to
create a New Account and follow the steps to complete registration.
Add Camera to App
Preparations for connection
-
1. Insert a Micro SD Card into the camera to save video clips or you can start the 7-day free cloud service. Without Micro SD Card or cloud service, no video will be saved.
- The camera only works with 2.4GHz Wi-Fi, not support 5GHz.
- When connecting to the network, please take the camera close to the router (Recommended within 10-15ft).
Connect Camera to App
-
Tap ‘Add Device’
-
Select ‘Battery Camera’
-
Turn on the Camera
-
Reset the Camera
-
Input Wi-Fi Password
-
Prepare the Scanning
-
Scan QR Code when Indicator Flashing
-
Finished Installation When Reaches 100%
-
Slowly in Red
-
Perform Network Diagnosis
-
View Installation Tips
Charge your doorbell
Prior to the doorbell installation, please charge up your doorbell for
about 8-10 hours till the charging LED turns BLUE from RED.
Compatible charger (not provided):
USB compatible mobile phone charger (DC 5V 1A~2A).
Set up Doorbell
Switch on power for your doorbell, and you will see the LED indicator flashes
red (once per second). Start setting up your doorbell following the in-app
instructions.
Tips
- Please operate the setup near your Wi-Fi router.
- Make sure your phone is connecting to a 2.4GHz Wi-Fi.
- Make sure the doorbell is turned on, and its indicator LED is flashing red. If not, press and hold RESET for 5 seconds.
- Ensure the Wi-Fi signal is good, and the Wi-Fi password is correct
.
LED STATUS | INDICATION |
---|---|
Solid red | Device is abnormal. |
Flash red (once/sec) | Ready for Wi-Fi configuration. |
Flash red (twice/sec) | Connecting to Wi-Fi |
Solid blue | Device is online |
Flash blue (once/sec) | Live-viewing doorbell cam |
Flash blue (twice/sec) | Firmware upgrading |
Pair With Your Indoor Chime
-
Click the SETTING button on the chime, and the chime will be in pairing mode for 20 seconds, with its red LED flashing.
Settings
-
Press the doorbell button to send a pairing signal, and your chime will sound to react, together with its blue LED flashing. Chime pairing succeeds.
Chime rings & indicator flashes blue -
Chime settings.
-
Ringtone selection. Click to change ringtone (4 ringtones available).
-
Volume control button.
Click to control volume: level 1: 110 dB; level 2: 100 dB level 3: 90 dB; level 4: 80 dB -
Settings. Click to enter/quit pairing mode; Press & hold for 5 seconds to restore factory defaults.
Install Your doorbell
-
1. **Select location for your doorbell.**
-
Select a location.
It is suggested to mount the doorbell at least 4 feet (120 cm) above the ground for optimal angle of view and best motion detection performance. -
Install at an angle.
You can purchase the following angled brackets so as to point your doorbell to a specific view angle.
* Corner Mount
* Wedge Mount
4. **Standard installation.**
Tamper Alarm
-
Anti-theft Tamper Alarm.
-
You can also enable the anti-theft alarm in doorbell settings.
-
Tamper Alarm On
With tamper alarm on, your doorbell detects disassembly by the trigger on its back, and then a 30-second siren alarm will be triggered. Meantime, video recording get started, and alarm notification will be pushed to the owner’s APP account. -
Tamper Alarm Off
You can disable the tamper alarm in doorbell settings, and detach the doorbell without any alarm for battery recharge or regular maintenance.
Product Specifications
Video Doorbell Model No.: Bell J7
Wireless Chime Model No.: Chime06
Documents / Resources
|
MUBVIEW Bel-7 SMART VIDEO DOOR BELL WIRELESS WIFI OUTDOOR
SECURITY
[pdf] User Guide
Bel-7, SMART VIDEO DOOR BELL WIRELESS, WIFI OUTDOOR SECURITY
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>