SLV 1006345 LED Pendant Light Instruction Manual
- June 15, 2024
- SLV
Table of Contents
1006345 LED Pendant Light
Instruction Manual
1006345 LED Pendant Light
1005395 1005396 1006345
INSTRUCTION MANUAL PART A Pendant Light 
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
The light source is only replaceable by a professional. The separate control
unit is only replaceable by a professional.
Technical Details are subject to change
Operating Manual PART B
Pendant Light
1005395 …96 1006345
Read manual carefully and keep for further use!
Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Do not stare into the active light source.
Additional safety advices =
Use as directed
Safety class I (1)
– Connection with protective conductor.
Operate only firmly fixed on an even surface.
Operate only on normal or not inflammable surfaces.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.
Admissible ambient temperature(ta): -20°C …+45°C.
Light Source
The light source of this luminaire may only be replaced by the manufacturer,
an authorized service technician or a comparable qualified person.
This product contains light sources of the energy efficiency class D.
Care / Storage
Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Installation
Switch off mains / fixed connection cable!
Use only described accessories.
Use only suitable fastening materials.
Only suited for ceiling surface mounting.
Install as shown in the figure.
Adjust pendant length of the wires with the wire fixer (A). If necessary
shorten the pendant cable. (attach wire end ferrules if necessary!). Direct
secondary cable through the strain relief. Place the strain relief (B) by
sliding to a position that avoids strain on the connection to the clamp. The
pendant cable may not be strained. Carry out a continuity test after
shortening pendant cable.
Suitable Dimmer: DALI dimmer / light control. Note manufacturer`s
instructions.
Electrical connection
Equip flexible wire ends with suitable wire ferrules!
Live conductor Terminal L
Neutral conductor Terminal N
Protective conductor Earth terminal
Dali control wires Terminals DA+ / DA-
Connect secondary cable to connection clamp.
Red wire (+) Terminal
Black wire (-) Terminal
Check secure fixation and proper function!
**** SLV UK
K Unit E Chiltern Park
Boscombe Road, Bedfordshire
LU5 4LT
© 27.10.2022 SLV GmbH, Daimlers. 21-23, 52531
Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0.
Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>