SLV 1006314 Wall Eskina Frame LED Light User Guide
- June 15, 2024
- SLV
Table of Contents
SLV 1006314 Wall Eskina Frame LED Light
Product Information
Specifications
- IP Rating: IP65
- Input Voltage: 220V-240V ~50/60Hz
- Power Consumption: 27W
- Luminous Flux: 3000K – 2200 lm, 4000K – 2400 lm
- Color Rendering Index (CRI): >80
- Dimensions: 24.5 x 7.3 x 17.1 cm
- Weight: 2.18 kg
- Model Number: 1006314
Product Usage Instructions
Safety Advice
Read the manual carefully and keep it for future reference. Failure to
follow the safety advice may lead to danger of life, burning, or fire.
- Any work on the electrical connection should only be done by a qualified electrician.
- Do not alter or modify the product in any way.
- Do not fasten anything on the product.
- Do not cover the product.
- Operate the product only with intact protection glass.
- If you suspect a defect or malfunction, take the product out of service and contact your dealer or a qualified electrician.
- Ensure that children cannot get harmed by the product.
- Avoid staring into the active light source.
Additional Safety Devices
Use the product as directed and follow the additional safety advice:
- The light source of this luminaire may only be replaced by the manufacturer, an authorized service technician, or a comparable qualified person.
- This product contains a light source of energy efficiency class D.
- Reference control setting: 4000K
Care and Storage
To ensure proper maintenance of the product, follow these care and storage
instructions:
- Disconnect the product from the mains and let it cool down before cleaning.
- Clean the external surfaces regularly with a slightly moistened cloth (water).
- Do not clean the product with a pressure washer.
- Keep the openings providing aeration or drainage free from obstructions.
- Avoid exposing the product to acidic surroundings, high salt content in the air, cleaning agents, fertilizer, thawing salt, or chemicals.
- Store the product in a dry and clean place.
Installation
Follow these instructions for proper installation:
- Switch off the mains or fix the connection cable before starting the installation.
- Use only the described accessories.
- Use only suitable fastening materials.
- The product is suited for wall surface mounting only.
- Follow local regulations for outdoor installations.
- Do not seal the product yourself with silicone.
- Install the product according to the declared IP type.
- Refer to the figure for the correct installation position.
Electrical Connection
Follow these instructions for the electrical connection:
-
Direct the fixed wiring with its complete insulation at least
15 mm into the housing. -
Equip flexible wire ends with suitable wire ferrules.
-
Check the secure fixation and proper function of the electrical connections.
-
Live conductor: Terminal L
-
Neutral conductor: Terminal N
-
Protective conductor: Earth terminal
Frequently Asked Questions
Can I install the product myself?
No, the installation requires professional knowledge and should only be
performed by a licensed electrician, following local and national regulations.
Can I replace the light source myself?
No, the light source can only be replaced by a specialist or a qualified
professional. The same applies to replacing the ballast.
What should I do if I suspect a defect or malfunction in the product?
Take the product out of service and contact your dealer or a qualified
electrician for assistance.
How should I clean the product?
Disconnect the product from the mains and let it cool down before cleaning.
Clean the external surfaces regularly with a slightly moistened cloth (water).
Do not use a pressure washer.
What should I do if the product gets exposed to acidic surroundings or
chemicals?
Avoid exposing the product to acidic surroundings, high salt content in the
air, cleaning agents, fertilizer, thawing salt, or chemicals. If exposed,
clean the product carefully and contact aprofessional if necessary.
Overview
Features
Required tools
Installation
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.
Technical Details are subject to change.
Operating Manual PART B
Wall Light: 1006314
Read manual carefully and keep for further use! Safety advices for installation and operation. Disregard may lead to danger of life, burning or fire!
- Any works on the electrical connection only by electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Operate only with intact protection glass.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children get not harmed by the product.
- Do not stare into the active light source.
- Additional safety advices =
Use as directed
- Safety class I ( ) – Connection with protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Do not strain mechanically or expose to strong dirt contamination. IP65: Protection against dust (dust-tight) – Protection against jetted water from all directions.
- Admissible ambient temperature(ta): -20°C …+35°C.
Light Source
The light source of this luminaire may only be replaced by the manufacturer,
an authorized service technician or a comparable qualified person. This
product contains a light source of the energy efficiency class D. Reference
control setting: 4000K
Care / Storage
- Disconnect product from mains and let it cool down.
- Clean external surfaces regularly with a slightly moistened (water) cloth. Do not clean with pressure washer.
- Openings providing aeration or drainage must be kept free. The following influences may have unwanted effects on the product:
- acidic surroundings,
- high salt content in the air,
- cleaning agents, fertilizer,
- thawing salt,
- chemicals. Store dry and clean.
Installation
Switch off mains / fixed connection cable!
- Use only described accessories.
- Use only suitable fastening materials.
- Only suited for wall surface mounting.
Follow local regulations for outdoor installations.
- Do not seal the product yourself (e.g. with silicone).
- Install according to declared IP type.
- Install as shown in the figure.
Electrical connection
Direct the fixed wiring with its complete insulation at least 15 mm into
the housing. Equip flexible wire ends with suitable wire ferrules!
- Live conductor Terminal L
- Neutral conductor Terminal N
- Protective conductor Earth terminal
Check secure fixation and proper function!
© 05.09.2022 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.