defender CH-118 Car Holder For Smartphone Instructions
- June 13, 2024
- Defender
Table of Contents
TRIFLES MAKE PERFECTION
CH-118
Operation manual
Installation of the holder on the dashboard
11 Assemble the holders you see on the picture below 
1.2 Delete the protective layer from the bottom of the holder
111 Put the nut on the hinge
11.2 Insert the hinge into the clamp inside the thread
1.1.3 Tighten the nut 1.3 Clean the surface of the dashboard and fix the
holder on it 
1.3.1 Prees the holder against the previously cleaned
surface
1:3.2 Fix the holder on the surface 
1.3.3 If necessary, adjust the
rotation angle of the magnetic part of the holder
2. Equipping the
smartphone with the metal plate 
Equipping the smartphone with the metal plate
2.1 Remove the protective film from the adhesive part of the plate.
2.2 Stick the plate on the phone case.
2.3 The plate can also be glued to the smartphone case. Case must be firm and
smooth. The plate can not be attached to silicone cases.
ATTENTION!!! Do not stick the plate over the NFC sensor! Do not stick the
plate on your smartphone in case it has wireless charging function!
2.4 In case smartphone has NFC or wireless charging functions, stick the plate
only on / under the smartphone case or put it under the case (the plate will
be fixed only by the case and will not interfere with the wireless charging or
NFC function without the case).
2.5 The metal plate can be placed under the smartphone cover (in case there is
no wireless charging and NFC functions and provided that smartphone is
dismountable).
2.6 You can remove the plate by picking up its edges with a thin, dense
object. 2.7 Remove the protective film from the metal plate
Installation of the smartphone onto the holder
31
Bring the smartphone close to the holder
CAR HOLDER
Terms and conditions of safe and efficient use of the product
Usage precautions:
- Use the product for its intended purpose only.
- Do not disassemble. This product does not contain parts that are entitled to self-sufficient repair. On the question of maintenance and replacement of a failed item apply to a dealer or Defender authorized service center, While receiving the product make sure that it is unbroken and there are no freely moving objects inside the product.
- Keep away from children under the age of 3. May contain small parts.
- Keep away from humidity. Never immerse the product in liquids.
- Keep away from vibrations and mechanical stresses, which can cause mechanical damaging of the product. In case of mechanical damage no warranties are provided.
- Do not use in the presence of visual damage. Do not use when the product is obviously defective.
- Do not use the product at temperatures below and above recommended temperatures (-20 – +50°C), under the conditions of humidity evaporation, as well as in hostile environment.
- Do not put into the mouth.
- Do not use the product for industrial, medical or manufacturing purposes.
- In case when shipment of the product was conducted in subzero temperatures, then before operating, the product should be kept in a warm placement (+16-25°C or 60-77°F) within 3 hours.
- Do not use the device while driving the vehicle, if it is diverted attention, and in other cases when the law obliges you to turn off the device.
Features
« Easy to adjust the position of the device vertically + Flexible stand Specification + Rotation: 360°
- Mounting: for the glass, on the dashboard « Material: plastic + rubber + metal + Color: black
IMPORTER: Defender Technology OU, Betooni str 11, 11415, Tallinn, Estonia.
Manufacturer: China Electronics Shenzhen Company. Address: 35/F, Block A,
Electronics Science & Technology
Building, Shennan Zhonglu, Shenzhen, China. Service life is 2 years. Date of
manufacture: see on the package.
Manufacturer keeps the right to change package contents and specifications
indicated in this manual.
The latest and detailed operation manual is available at www.defender-
global.com.
Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>