VIDEX VL-HB01-1505B LED Highbay Light User Manual
- June 14, 2024
- VIDEX
Table of Contents
USER’S MANUAL
INDEX VL-HB01-1005B VL-HB01-1505B
TECHNICAL PARAMETERS
1 2
INDEX
VL-HB01-1005B
VL-HB01-1505B
3
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
LED HIGHBAY LIGHT
TECHNICAL PARAMETERS
1. Rated input voltage V (V) and frequency Hz (Hz);
2. Rated power W (W);
3. Luminous flux Lm (Lm):
3.1. The total luminous flux of the lamp;
3.2. Rated useful luminous flux ((Ouse);
3.3. Energy efficiency class according to the European Commission Regulation
2019/2020;
3.4. Energy efficiency class according to the technical regulations of
Ukraine;
INTERPRETATION OF ICONS
4. Correlated color temperature (K).
5. The product is not compatible with light dimmers;
6. Color rendering index;
7. Rated beam angle (°);
8. Nominal resource L70B50 (hours);
9. Class of protection against dust and moisture. The product is protected
from dust and water jets;
10. On/off cycles;
11. Class of protection against mechanical impacts;
12. Time to reach 100% light flux (sec.);
13. No mercury contains;
14. Minimum distance from the illuminated object;
15. Caution, danger of electric shock;
16. Class of protection against electric shock I. A product in which the
means of protection against electric shock, in addition to the main
insulation, is an additional protective circuit connected to the grounding of
the power supply network;
17. The product is suitable for outdoor use;
18. The product is suitable for use in industrial premises;
19. The built-in light source cannot be replaced;
20. Replacement of the control gear can be carried out only by an authorized
person of the manufacturer;
21. A damaged light diffuser must be replaced;
22. The product complies with the technical regulations of Ukraine;
23. The product meets the requirements of EU directives;
ENVIRONMENTAL PROTECTION
24. Pursuant to the provisions of the WEEE Act, it is forbidden to put waste equipment marked with the symbol of a crossed bin together with other waste. The user, wishing to get rid of electronic and electrical equipment, is obliged to return it to a waste equipment collection point. There are no hazardous components in the equipment that have a particularly negative impact on the environment and human health.
– Overall dimensions (mm), product weight (g/kg), current (mA), operating
temperature range (°C), production date and batch number are indicated on
individual packaging;
– Light curve type: D (cosine)
– Class of light distribution: N
– Product materials: aluminum alloy, tempered glass, polycarbonate;
– The shelf life before the start of use is unlimited;
PRODUCT’S PURPOSE AND APPLICATION
The product is intended for lighting production and warehouse premises, as well as external objects. The product is not intended for use in domestic premises.
CONTENTS OF THE KIT
– Lamp;
– Mounting ring;
– User manual;
– Individual packaging.
MOUNTING AND CONNECTION INSTRUCTIONS
Before installation, it is necessary to read the instructions. Installation must be performed by a specialist with appropriate qualifications. Installation can be performed only when the power supply is turned off. For this product, only the hanging method of fastening is provided, which is performed using a stock mounting ring. It is forbidden to hang the lamp by the electric cable. Please install and connect accordingy to the diagram below. The connection must be made using a distribution box (not included) with a level of protection against dust and moisture no less than that of the lamp. The product has a ground wire. Failure to connect the ground wire may result in possible electric shock. Before the first use, it is necessary to check the correctness of the mechanical fastening and connection. The product can only be used in a network that meets the energy requirements and quality standards stipulated by law.
FUNCTIONAL CHARACTERISTICS
The product can be used outdoor and indoor (except of domestic use).
MAINTENANCE AND SAFETY INSTRUCTIONS
WARNING! Do not look directly at the LED beam. The product can heat up to high
temperatures. Do not touch, there is a risk of burns.
Any maintenance work should be carried out with the electricity switched
off and the product should be cured and dry. Do not cover the lamp with
heat-insulating materials, ensure free access of air. Clean only with soft and
dry cloths. Do not use chemical detergents. The product may only be supplied
with rated voltage or voltage within the given range. It is forbidden to use
the product with a damaged light diffuser, damaged wiring or connection
points. Do not attempt to repair or disassemble the sealed housing of the
lamp, as this may impair its functionality and void the warranty. The product
cannot be used in adverse conditions, e.g. vibration, explosive atmosphere,
fumes or chemical fumes, etc. The product has an irreplaceable LED light
source. If the light source is damaged, the product cannot be repaired. A used
or damaged product should be disposed of in accordance with current
regulations.
Failure to follow these instructions may result in, for example, fire, burns,
electric shock, bodily injury, and other material and non-material damage. The
manufacturer is not responsible for any damage caused by failure to follow the
above instructions.
STORAGE AND TRANSPORTATION
Before delivery to the direct point of sale, the product must be stored in the
manufacturer’s packaging at a temperature from -20°C to +40°C, in a dry room
and without exposure to direct sunlight.
Transportation can be carried out by land, sea, air transport in the
manufacturer’s transport packaging.
WARRANTY
The warranty period for the product is indicated on the individual packaging
and begins from the date of sale. During the warranty period, a faulty product
can be exchanged or returned with prove of purchase and all components and
accessories preserved. The following does not apply with the scope of limited
warranty:
– Misuse the product and cause the products components damage;
– Unauthorized disassemble or the presence of deep mechanical damage to the
product;
– Damage due to force majeure.
The manufacturer reserves the right to make changes to these user manual or technical changes to the product without prior notice.
(EN) not included
Importer: Allegro Opt Sp. z o.o., Handlowa 23, 05-120 Legionowo, Poland. Made
in P.R.C.
www.videx.com.pl
Documents / Resources
|
VIDEX VL-HB01-1505B LED Highbay
Light
[pdf] User Manual
VL-HB01-1505B LED Highbay Light, VL-HB01-1505B, LED Highbay Light, Highbay
Light, Light
---|---