iottie ATSWCG206 Auto Sense 2 Air Vent Mount User Manual

iottie ATSWCG206 Auto Sense 2 Air Vent Mount

Index

For optimal mounting and charging, please follow the detailed instructions within this manual when using the Auto Sense 2. iOttie is not liable for possible damages due to product misuse.

Product Information

Critical Information

When mounting your phone, be sure to hold it perpendicular to the cradle to ensure the proximity sensor is able to detect the device.

f you mount your phone at an angle, the device will need to be very close to the sensor for the arms to open.

Smartphone Cases

Reflective smartphone cases work best with the auto sensing technology. Dark colored or textured cases do not reflect light well, making it difficult for the proximity sensor to detect the phone. If you are using a dark colored or textured case, the phone will need to be very close to the sensor for the arms to open.

Compatibility

Before using this product, make sure your device is Qi-enabled. Compatible devices include the Google Pixel, iPhone, and Samsung Galaxy.

Power Adapter

If using a power adapter, ensure it is a 20W Qualcomm Quick Charge 2.0 or equivalent for an efficient charging experience.

At a Glance

Product Specifications

Input| DC 5V – 3A
DC 9V – 2A
DC 12V – 1.5A
---|---
Output| 15W
Charging Port| USB-C
Length| 4.4″
Width| 2.83″
Height| 4.02″
Weight| 5.15 oz

Charging Indicator

the car mount or phone is overheating.

Installation

Attaching the Mount

1. Connect the mount cradle to the ball joint, and tighten the cradle knob.

2. Push the mount all the way onto the air vent blades.

3. Adjust the rotating support so it is facing down.

Connecting to Power

1. Plug the included USB-C cable into the USB port located on the back of the mount cradle.

2. Connect the USB-C cable to your vehicle’s USB-C port or auxiliary power outlet via a 20W adapter. (Power adapter not included.)

Note: If connecting directly to your vehicle’s USB-C port, charging speeds may be affected. For the fastest charge, we recommend connecting to the auxiliary power outlet via a 20W adapter.

Using the Auto Sense Mechanism

Once it is unplugged or the car is turned off, the Auto Sense’s internal battery keeps a charge for up to one hour.

Mounting and Charging

1. Hold the phone in front of the mount cradle to activate the automatic clamping arms.

2. Place the phone inside the mount. The arms will close automatically after one second and wireless charging will begin.

Releasing Device

Release buttons are located on either side of the mount cradle. To release your phone simply press one or both buttons and the arms will open. The release buttons can also be used to open the mount arms.

Note: The Auto Sense is powered via a USB-C cable and coil cell battery. There is no on/off switch. Once it is plugged in, the device will remain on unless the vehicle is turned off.

Adjusting the Mount

Cradle Knob

To rotate the cradle, loosen the cradle knob. Tighten to lock into desired position.

Bottom Foot

The foot can be adjusted up  and down to fit any size phone by pulling down or pushing up.

Qi Alignment Guide

The Qi receiver coil is usually located in the center of the phone. Check your phone’s manufacturer for Qi coil location. The Qi coil on the mount is located at the top, above the iOttie logo. Please line up your phone with the device for optimal wireless charging.

Note: For larger phones and cases, the bottom foot will need to be extended to ensure proper alignment.

FCC Part 15 Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.

NOTE: This equipment has been tested and found to comply with the limits for a wireless power transfer, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Operational Warnings

During the charging process, the transfer of electricity gives off heat. Your device may become warm, but should not become exceedingly hot.
If the device gets wet, please cease charging immediately. Remove all plugs and dry the product completely. Device is only to be operated in a dry, indoor environment.
 Please be careful of excessive drops, dents, punctures, or deformities on the device. If you are concerned, please unplug the device and contact the manufacturer.
 Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
 Operating this device in a hot environment or in direct sunlight for a long period of time may cause malfunctions. We recommend keeping the product in cooler temperatures.
 Please use included components for an optimal experience. To support Qi wireless charge when using a third party car charger or a USB Power Adapter use a minimum output of both “DC 9.0V-1.67A or DC z5.0V-2.0A” and at least QC 2.0.
 The product’s signal could possibly interfere with you TPMS (tire pressure monitoring system). If you notice that your TPMS light turns on, please try using your mount in different locations to avoid the signals from interfering with each other.
 California Proposition 65 this product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.

CAUTION

OLD ELECTRICAL APPLIANCES MUST NOT BE DISPOSED OF TOGETHER WITH THE RESIDUAL WASTE, BUT HAVE TO BE DISPOSED OF SEPARATELY.

IC Warning

• This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

THE RECOMMENDED DISTANCE BETWEEN YOU AND THE WIRELESS CHARGING DEVICE SHOULD BE AT LEAST:

DRIVER SEAT

Knee| 40cm
Leg| 60cm
Body| 70cm
Hands| 30cm
Arms| 70cm
Head| 80cm
FRONT PASSENGER SEAT

Knee| 43cm
Leg| 59cm
Body| 62cm
Hands| 46cm
Arms| 55cm
Head| 80cm

*All measurements are based on FCAR Car Models as described by the ACRISS Class Clode system.

Hereby, iOttie, Inc declares that the radio equipment type HLCRIO161 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.iottie.com.
Declaration for EU Compliance: Operation Freq: 118.59-151.12 kHz, Max. RF power transmitted: H-Field 20.35dBμA/m @3m distance.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The Auto Sense 2 is backed by a 2 year warranty.

Documents / Resources

| iottie ATSWCG206 Auto Sense 2 Air Vent Mount [pdf] User Manual
ATSWCG206 Auto Sense 2 Air Vent Mount, ATSWCG206, Auto Sense 2 Air Vent Mount, 2 Air Vent Mount, Vent Mount
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>