iottie CHWRIO107GR iON Wireless Duo Wireless Charging Stand and Pad User Manual
- June 5, 2024
- iOttie
Table of Contents
ION Wireless Duo
Wireless Charging Stand & Pad User Manual
Getting Started
For an optimal charging experience, please follow the detailed instructions in
this manual when using the iON Wireless Duo.
Compatibility
Please make sure your device is Qi Wireless compatible. Compatible devices
include:
Google
Pixel 5, 4, 4XL, 3, 3XL
Apple
iPhone 11, 11 Pro, 11 Pro Max, XR, XS, XS Max, X, 8, and 8 Plus Qi- Wireless
enabled Airpods and compatible Airpods cases
Samsung
Galaxy S20 Ultra, S20+, S20, Z Flip, Fold, Note10+, Note10, S10, S10e, S10+,
Note9, 59, 59+, Note8, S8, 58+, S7 edge, S7, S6 edge+, Note5, S6 edge and 56
Any Qi-enabled devices or accessories
Please only use the included cable and power adapter. Third-party components
may impact wireless charging performance.
Exploring
What’s in the Box?
Key Features
Dual Qi Wireless Charging
Wirelessly charge two devices simultaneously with the charging stand or pad.
Charging Qi Wireless Accessory Devices
Also an accessory charger for wireless charging earbuds, and any 01-enabled
wireless device or accessory.
Charging Speeds
Engineered to deliver charging speeds of up to 15W for Android, and 7.5W for
iPhone. Dual Qi-Coil charging stand for wireless fast charging smartphones
plus flat rubberized Qi wireless charging zone for smartphones and Qi-enabled
accessories.
Ideal Viewing & Charging Convenience
Draft messages, browse the web, and manage music in portrait mode. Or charge
the phone horizontally in landscape mode to watch videos, edit photos, and
more.
Included DC Cable & Adapter
- Plug the Charging Cable into the DC port on the back of the iON Duo.
- Plug the Power Adapter into a wall outlet. Both Charging Indicators will turn on and then fade, to inform you the iON Duo has received power.
Please only use the included cable and power adapter. Using third-party components may impact wireless charging performance
Qi Alignment Guide
Use the guide below to receive an efficient wireless fast charge
Oi Coil Location
The Qi coil is generally found in the center of most smartphone models.
Smartphone Alignment (Stand)
The charging stand has portrait and landscape charging modes.
Portrait Charging
I Line up the center of the smartphone vertically to the charging surface and
rest the device on Anti-Slip Foot until a charging connection is found.
Landscape Charging
Line up the center of the smartphone horizontally to the charging surface
and rest the device on Anti-Slip Foot until a charging connection is found.
Rest your smartphone on the charging surface parallel to the Charging Stand
Using the Anti-Slip Foot (Stand)
The Anti-Slip Foot comes built-in on the stand portion of the iON Duo.
Pixel Buds Alignment
(Pad)
Place Pixel Buds on the designated charging pad. The cap opening should be
placed perpendicular with the laser-etched line on the pad. The Plus sign on
the pad is where the center of the Qi coil is on both your Pixel Buds and the
charging pad
Rest your smartphone or Qi-wireless accessory device on the charging surface parallel to the Charging Pad
Troubleshooting
Your device’s screen will show that it is charging. If your device is not
charging, please check the corresponding Charging Indicator on the front of
the device.
Fading White Light
When powered on, the light will appear briefly and then fade.
Blinking Red Light
A blinking red light will appear if the device is incompatible or Qi coil is
blocked.
Solid White Light
The white light will remain if the device is charging wirelessly.
Specifications
| ITEM | DESCRIPTION |
|---|---|
| INPUT | 19V1.8A |
| OUTPUT (TOTAL) | 20W |
| OUTPUT (STAND / PAD) | 15W / 5W |
| LENGTH | 315″ |
| WIDTH | 5.90″ |
| HEIGHT | 5. |
| WEIGHT | 6.2 oz |
Wall charger
| INPUT | OUTPUT |
|---|---|
| 110V-240VAC 0.8A | 1W 1.8A |
Declaration of Conformity (FCC)
This device complies with Part 18 of the FCC Rules.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
product.
NOTE: This equipment has been tested and found to comply with the limits
for a wireless power transfer, pursuant to Part 18 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, If not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there Is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment Into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This product has been certified by IOttie to meet Google’s compatibility
standards. Google is not responsible for the operation of this product Or its
compliance with any applicable safety or other requirements. Learn more at
g.co/madeforgoogle.
Google’s “made for the badge, “Pixel,” and related marks are trademarks of
Google LLC.
RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your body.
FCC Wining
This device complies with Pan Is of the FCC Rule, Operation is subject to the
follow mg two conditions (I) This &nee may not cause harmful imbalance. and
111 this des ice mud accept any ma-dm-act mcened including imminent:nce that
may cause indeed permit.
Operational Warnings
! During the charging process, the transfer of electricity gives off heat.
Your device may become warm, but should not become exceedingly hot.
! If the device gets wet please cease charging immediately. Remove all plugs
and dry the product completely. The device is only to be operated In a dry,
Indoor environment
! Please be careful of excessive drops, dents, punctures, or deformities on
the device. If you are concerned, please unplug the device and contact the
manufacturer.
! Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
! Operating this device in a hot environment or in direct sunlight for a long
period of time may cause malfunctions. We recommend keeping the product in
cooler temperatures.
! Please use included components for an optimal experience. To support 01 fast
charges when using a third party. Power Adapters use a minimum output of 19V
1.8A or 19V with the higher amp.
If your phone is misaligned when wireless charging, your device may become
warm due to inefficient wireless output. It is important to always properly
align your smartphone.
California Proposition 65: This product contains chemicals known to the state
of California to cause cancer and birth defects or other reproductive harm.
Caution
Old electrical appliances must not be disposed of together with residual
waste, but have to be disposed of separately.
If you love your iOttie product, let us know by leaving a review online, or connecting with us on our social platforms.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>