iottie chwrio301 iON Wireless Plus Fast Charging Pad User Manual
- June 6, 2024
- iOttie
Table of Contents
Operation Manual
iON Wireless Plus
Fast Charging Pad
Love your iOttie product?
Let us know by leaving a review online, or connect with us on our social
platforms.
Having issues?
Our Customer Service Team is waiting to assist you! Please reach out to us at:
cs@iottie.com
Getting Started At a Glance
Follow the detailed instructions within this manual when using the iON
Wireless Plus Fast Charging Pad.
Please make sure your device is Qi Wireless compatible. Compatible devices
include iPhone X, 8 Plus, 8, Samsung Galaxy S9, S9+, Note 8, S8, S8+, S7, S7
Edge, S6, S6 Edge, and any other Qi-enabled devices. Not all smartphones can
receive a wireless fast charge, however, they will receive a standard wireless
charger. Check your phone’s charging features for fast charge capabilities.
Please only use the included cable and power adapter. Third-party components
may impact wireless charging performance. If using a third-party charger,
please only use a Qualcomm Quick Charge 3.0 or equivalent adapter. Plugging
the Charging Pad into a computer will not provide adequate power to support
wireless fast charging. Please only plug directly into a Power Adapter.
iOttie is not liable for possible damages due to product misuse.
At a Glance
what’s in the Box:.
Power adapter type may vary by country
Key Features
Qi Wireless Fast Charging
Charge smartphones faster than a standard wireless charger. Max Wireless
Charging Capacity: 7.5W iPhone, 10W Android
Charging Hub
Powerful 18W USB-C input allows simultaneous wireless and wired charging.
Charge a second device via USB-A output. Max USB-A Charging Capacity: 12W
Heat Ventilation
Internal air vent structure reduces heat to maximize wireless charging
efficiency.
Slip Resistant
Charging surface features an Anti-Slip Ring to prevent smartphones from
shifting while charging wirelessly.
Preparation
Please only use the included cable and power adapter. Using third-party components may impact wireless charging performance.
- Plug the Charging Cable into the USB-C port on the back of the charging pad and connect the USB-A side to the Power Adapter.
- Plug the Power Adapter into an AC outlet. The Charging Indicator will turn on and then fade to inform you the pad has received power.
Please do not plug Charging Pad into a computer, as this will not provide adequate power to support wireless fast charging.
Oi Alignment Guide
Use the guide below to receive an efficient wireless fast charge.
Qi Coil Location
The Qi coil is generally found in the center of most smartphone models.
Smartphone alignment
Center the back of the smartphone in the center of the Anti-Slip Ring for a
fast and efficient wireless charge.
Rest your smartphone on the charging surface parallel to the Charging Pad.
Troubleshooting
Your device’s screen will show that it is charging. If your phone is not charging, check the Charging Indicator on the front of the device:
Please contact customer service at cs@iottie.com if you have any questions.
Specifications
Charging Pad
| ITEM | DESCRIPTION |
|---|---|
| 5V 3A | |
| INPUT | 9V 2A |
| OUTPUT | WIRELESS: 5V 1A / 9V 1A |
USB: MAX 5V 14 5W
LENGTH| 4.4″
WIDTH| 2.7″
HEIGHT| 1.1″
WEIGHT| 130g
Wall Charger
| INPUT | OUTPUT |
|---|
110’250V
600mA| 3.6’6V 34
6∼19V 24 9″12V 1.5A
Declaration of Conformity (FCC)
NOTE: This equipment has been tested and found to comply with the limits
for a wireless power charger, pursuant to Part 18 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
product.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Operational Warnings
During the charging process, the transfer of electricity gives off heat. Your
device may become warm, but should not become exceedingly hot.
If the device gets wet, please cease charging immediately. Remove all plugs
and dry the product completely. Device is only to be operated in a dry, indoor
environment.
Please be careful of excessive drops, dents, punctures, or deformities on the
device. If you are concerned, please unplug the device and contact the
manufacturer.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Operating this device in a hot environment or in direct sunlight for a long
period of time may cause malfunctions. We recommend keeping the product in
cooler temperatures.
Please use included components for an optimal experience. To support Qi fast
charge when using a third-party car charger or a USB Power Adapter use a
Qualcomm Quick Charge or 3.0 equivalent adapter.
If your phone is misaligned when wireless charging, your device may become
warm due to inefficient wireless output. It is important to always properly
align your smartphone, especially when charging 2 devices via wireless and
wired connections.
CAUTION
OLD ELECTRICAL APPLIANCES MUST NOT BE DISPOSED OF TOGETHER WITH THE RESIDUAL
WASTE, BUT HAVE TO BE DISPOSED OF SEPARATELY.
Manufacturer:
iOttie, Inc.
20 West 37th Street
6th Floor
New York, NY 10018
W www.iottie.com
cs@iottie.com
Documents / Resources
|
iottie chwrio301 iON Wireless Plus Fast Charging
Pad
[pdf] User Manual
chwrio301, iON Wireless Plus Fast Charging Pad, chwrio301 iON Wireless Plus
Fast Charging Pad
---|---