iOttie iON Wireless Mini Fast Charging Pad User Manual
- June 6, 2024
- iOttie
Table of Contents
iOttie iON Wireless Mini Fast Charging Pad
Getting Started
Follow the detailed instructions within this manual when using the iON Wireless Mini Fast Charging Pad.
Please make sure your device is Qi Wireless compatible. Compatible devices
include iPhone X, 8 Plus, 8, Samsung Galaxy S9, S9+, Note 8, S8, S8+, S7, S7
Edge, S6, S6 Edge, and any other Qi-enabled devices.
Not all smartphones can receive a wireless fast charge, however, they will
receive a standard wireless charger. Check your phone’s charging features for
fast charge capabilities.
Please only use the included cable and power adapter. Third-party components
may impact wireless charging performance.
If using a third-party charger, please only use a Qualcomm Quick Charge 3.0 or
equivalent adapter.
Plugging the Charging Pad into a computer will not provide adequate power to
support wireless fast charging. Please only plug directly into a Power
Adapter.
Exploring
What in the Box:
Key Features
Qi Wireless Fast Charging
Charge smartphones faster than a standard wireless charger.
Max Wireless Charging Capacity: 7.5W iPhone, 10W Android
Slip Resistant
The charging surface features an Anti-Slip Ring to prevent smartphones from shifting while charging wirelessly.
Charging Indicator
Your device’s screen will show that it is charging.
If your phone is not charging, check the Charging Indicator on the front of
the device:
White Light
When powered on, a white light will appear briefly and then fade.
A white light will remain on if the phone is charging properly.
Blinking Red Light
A blinking red light will appear if the phone is incompatible or Qi coil is blocked.
Preparation
Please only use the included cable and power adapter.
Using third party components may impact wireless charging performance.
- Plug the Charging Cable into the USB-C port on the back of the charging pad and connect the USB-A side to the Power Adapter.
- Plug the Power Adapter into an AC outlet.
The Charging Indicator will turn on and then fade to inform you the pad has received power.
Please do not plug Charging Pad into a computer, as this will not provide adequate power to support wireless fast charging.
Qi Alignment Guide
Use the guide below to receive an efficient wireless fast charge
Qi Coil Location The Qi coil is generally found in the center of most smartphone models.
Smartphone alignment
Center the back of the smartphone in the center of the Anti-Slip Ring for a fast and efficient wireless charge.
Rest your smartphone on the charging surface parallel to the Charging Pad
Troubleshooting
Your device’s screen will show that it is charging.
If your phone is not charging, check the Charging Indicator on the front of
the device:
Specifications
Charging Pad ****
Declaration of Conformity (FCC)
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. You can refer to the following completed FCC warnings.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Operational Warnings
- During the charging process, the transfer of electricity gives off heat. Your device may become warm, but should not become exceedingly hot.
- If the device gets wet, please cease charging immediately. Remove all plugs and dry the product completely. Device is only to be operated in a dry, indoor environment.
- Please be careful of excessive drops, dents, punctures, or deformities on the device. If you are concerned, please unplug the device and contact the manufacturer.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Operating this device in a hot environment or in direct sunlight for a long period of time may cause malfunctions. We recommend keeping the product in cooler temperatures.
- Please use included components for an optimal experience. To support Qi fast charge when using a third party car charger or a USB Power Adapter use a minimum output of both “9.0V-2.0A or 12V-1.5A”.
- If your phone is misaligned when wireless charging, your device may become warm due to inefficient wireless output. It is important to always properly align your smartphone, especially when charging 2 devices via a wireless and wired connection.
- California Proposition 65 This product contains chemicals known to the state of California to cause
cancer and birth defects or other reproductive harm.
CAUTION
OLD ELECTRICAL APPLIANCES MUST NOT BE DISPOSED OF together WITH THE RESIDUAL
WASTE, BUT HAVE TO BE DISPOSED OF SEPARATELY.