beper VE.112 Digital Stand Fan User Manual
- June 4, 2024
- beper
Table of Contents
beper VE.112 Digital Stand Fan
Precautions
Read the following instructions carefully, since they give you useful safety
information about installation, use and maintenan-ce and help you avoid
mishaps and possible accidents. Remove the packing and make sure that the
appliance is intact, with special attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be
accessible to the children, in order to preserve them from danger sources. It
is recommended not to throw these packing ma-terial in the domestic waste, but
to deliver them to the appropriate station of collection or destruction
refusals, asking eventually infor-mation to the manager of the Sanitation
Department of your own mu-nicipality.
If the supply cord is damaged, it must be replaced by the manufac-turer, its
service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds
to the data specified on the label.
The appliance can be damaged if the voltage is not correct.
If the plug does not suit the socket, let it be replaced with another suitable
plug by qualified personnel only, which shall also ensure that the section of
the socket cables is suitable for your appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not
recommended; should they be necessary, please use only simple or multiple
adaptors and extensions in compliance with the safety rules in force, making
sure that the capacity absorption limit marked on the simple adaptors and the
extensions and the maximum power limit marked on the multiple adaptor are not
exceeded.
Do not use the appliance if the cable or the plug shows any damages. Do not
use the appliance after a possible irregular working. In this case, switch it
off and do not break it open. Refer to an authorized Beper after-sale service
for repair and require original spare parts only. Failing to follow these
instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is
to be considered as improper and thus dangerous. The manu-facturer cannot be
responsible for any damages deriving from impro-per, wrong or incautious use.
- This appliance is for household use only.
- To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.
- Do not use the appliance near explosives, highly flammable mate-rials, gases or burning flames.
- Do not allow children, disabled people or every pe- ople without experience or technical ability to use the appliance if they are not properly watched over.
- Close supervision is necessary when any appliance used by or near children.
Description of product Fig.A
- Motor head unit
- Drive shaft
- Locking nut
- Locking cap
- Grid hook
- Central disc
- Front fan grid
- Fan grid clip (x4)
- Fan blades
- Handle
- Rear fan grid
- Remote control
- Weighted base
- Base cover
- L-shape bolt
- Washer
- Support pole
- Height adjustment ring
- Extension pole
- Mains cord
- Control panel
- Display panel
- Main unit
- Central disc screws (x3)
- Grid locking screw
- Grid locking nut
- Fixing screw
Assembly instructions
Unscrew and detach the L-shape bolt and the washer from the bottom of the
support pole.
Attach the base cover to the weighted base by pressing them together.
Insert the bottom of the support pole into the hole in the assembled base.
Screw the washer and the L-shape bolt back into the support pole to secure
everything together.
Pull the extension pole out of the support pole. To do so, loosen the height
adjustment ring by rotating it a few turns anti-clockwise. Then turn the
height adjustment ring clockwise to lock the extension pole at the desired
height.
Slide the main unit onto the extension pole. Rotate the fixing screw clockwise
to secure the connection. Rotate the locking nut anticlockwise to remove it
from the drive shaft. Be sure to remove and dispose of the plastic sleeve on
the drive shaft, if not done already, before continuing with assembly.
Put the rear fan grid onto the motor head unit, with the handle at the top,
and replace the locking nut.
Tighten the locking nut by rotating it clockwise and fix the rear fan grid in
place. Make sure the 3 tabs on the motor head are inserted into the slots in
the rear fan guard.
Fit the groove in the centre of the fan blades into the pins on the drive
shaft and replace the locking cap. Tighten the locking cap by rotating it
anti-clockwise and fix the fan blades in place.
Check the position of the blade by rotating it by hand and making sure that
they do not touch the locking nut. The blade must rotate freely.
Attach the plastic disc to the front fan grid with the 3 screws provided using
a cross-head screwdriver (not inclu-ded). Finally, place the fan front grid
onto the rear fan grid and fix it with the grid clips.
Operation
Place the fan on a dry, even surface, plug it to a wall socket.
All available settings options will start flashing on the control panel.
Ensure the remote controls contains two AAA size batteries (not supplied).
ON/Speed button
Press the ON/SPEED button (on the remote control or on the control panel) to
switch on the fan. At first operation it will start at medium speed; for
following operations, the fan will start at the last selected settings.
Press the ON/SPEED button again to select HIGH or LOW speed.
Off button
- Press the OFF button to switch off the fan.
- Mode (only on remote control)
- Press the MODE button to change the operating mode:
- Normal: the fan operates at a constant speed. The mode indicator is off.
- Nature: the fan simulates a natural breeze mode by automatically alternating fan speeds, as in nature. The NAT mode indicator is green.
- Sleep: the fan simulates a soft, natural breeze suitable for night-time use. The SLP mode indicator is green. Swing
- Press the SWING button to activate the oscillation function for widespread breeze distribution.
- Press the button again to stop oscillation.
- Lamp (only on remote control)
- Press the LAMP button on the remote control to turn off all indicators on control panel, when the fan is off but still plugged to the wall socket (stand-by mode). This option cannot be selected when the fan is on.
Timer
Push the TIMER button (when the fan is working) to set the time in which the fan will shut off (the led indicators corresponding to the time set will appear on control panel). Timer can be set to a maximum of 7,5 hours; by pressing the button, the rime is set half hour by half hour, and the green LED indicators corresponding to the set time will turn on.
Adjusting tilt of the fan head
The fan head can be tilted so that the breeze is directed towards a precise
angle.
To tilt the fan head, make sure the fan is disconnected from the power supply.
Hold the motor housing of the fan with one hand, and grip the fan head with
the other. Carefully tilt the fan head until it reaches the desired angle.
Caution: Do not attempt to tilt the fan head further than it is intended to. Doing so will damage the unit.
Cleaning
- Before performing any cleaning operation, switch off and unplug the fan.
- For cleaning the fan, use a soft cloth, that can be slightly damp.
- Do not use alcohol or chemical substances, or any detergent that could damage this appliance.
- Do not spray water or other liquids on the fan in order to protect it.
- After cleaning, dry every component before using the appliance.
- During the winter season and when not in use for a long time, keep the appliance in a dry and clean place.
Technical data
- Power : 50W
- Adapter : 220-240V ~ 50Hz
- For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original
purchase a 24 month guarantee ap-plies to material and production defects. The
purchase receipt and the guarantee certificate must be submitted together in
case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase
(fiscal receipt) indicating the date of purchase and the model of the
appliance
For any technical assistance, please contact directly the seller or our head
office in order to preserve the applian-ce’s efficiency and NOT TO void the
guarantee. Any intervention on this appliance by non-authorized persons will
automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or
production during the period of guarantee, we guarantee repair free of charge
on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs
of use in consumable products (such as lamps, batteries, heating elements…)
the aesthetic parts are excluded from the guarantee, and any defect whatsoever
resulting from non-respect of the rules for use, negligence in usage and/or
maintenance of the appliance, carelessness, wrong or improper installation,
damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the
appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is
an accessory and/or a detachable part of the product, Beper reserves the right
to replace only the very part in question and not the entire product
Contact your distributor in your country or after sales department Beper.
E-mail assistenza@beper.com which will forward your
enquiries to your distributor.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>