ATUMTEK ATYK165 Wireless Remote Shutter for Phone User Manual

ATUMTEK ATYK165 Wireless Remote Shutter for Phone

Product Introduction

The ATUMTEK Wireless Remote Shutter is a device that allows you to control your phone camera remotely. It features an ON/OFF button, a remote release button, an LED indicator light, and a replaceable battery.

Product Parameters

• Size: 48.533.712.5mm
• Bluetooth Device Name: ATUMTEK
• Bluetooth Version: Bluetooth 5.2
• Remote Distance: 10m (33ft)
• Cell Battery Model: 3V Lithium Battery CR2032
• Battery Lifetime Span: Taking around 15,000 pictures
• Package Included: 2 Wireless Remote Shutter, 2 Anti-drop Strap

Product Usage Instructions

1. Switch On:
   Switch on the button on the right side first, then press and hold the remote shutter button for 3 seconds to activate the remote. The LED indicator light will flash, indicating that the remote shutter is ready to connect.

2. Switch Off:
   To turn off the remote shutter, switch off the button on the right side directly.

3. Bluetooth Connection:
   After switching on the remote shutter, open the Bluetooth settings on your phone, search for and connect to the ATUMTEK device. Once connected, the LED indicator light will turn off. The remote will automatically connect with the same phone device after the first connection.
   Note:

4. The remote will automatically power off after 5 minutes of no connection, and the LED indicator light will be off.

5. If you have multiple ATUMTEK remotes, make sure to clear other devices or rename them for easy distinction.

6. If your phone is connected to too many Bluetooth devices, please clear some first and then try again.

7. Taking Pictures and Recording Videos:
   After the Bluetooth connection, open the phone camera directly. To capture a photo, press the remote button once. For video recording, select the video option in the phone camera and press the remote button once to start recording. Press the button again to stop recording.
   Note: The remote can only control the phone camera directly and cannot control phone apps.

8. Low Battery:
   If the remote indicator light is off and the remote does not connect or take pictures, it means the battery is low. To replace the battery, push the back cover of the remote control to open it and replace the cell battery with a new one (Model: 3V Lithium Battery CR2032). The new battery works for around 6 months.

9. About Android System Phones Connection:
   Some Android phones use the volume button to control the camera or zoom. To use the remote shutter, please reset the phone camera settings, find the volume key function, and set it to “shutter” (Do not select zoom or focus).

Contact Information

Thank you for choosing ATUMTEK!
ATUMTEK offers warranty coverage for all its branded products when purchased through authorized channels. For assistance, please reach out to our support team at [email protected].

IC Warning
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Product introduction

1. ON/OFF button
2. REMOTE release button
3. LED indicator light
4. Replaceable battery

Product Parameter

• Size: 48.533.712.Smm
• Bluetooth Device Name: ATUMTEK
• Bluetooth Version: Bluetooth 5.2
• Remote Distance: 1 Om (33ft)
• Cell Battery Model: 3V Lithium Battery CR2032
• Battery Lifetime Span: Taking around 15,000 pictures
• Package Included:
  • 2* Wireless Remote Shutter
  • 2* Anti-drop Strap

Wireless Remote Shutter User Manual

• Switch On
  Switch on the button on the right side first, then press and hold the remote shutter button for 3 seconds to activate the remote. Blue light flashes, remote shutter is ready to connect

• Switch Off
  Switch off the button on the right side directly to close the remote shutter.

Bluetooth Connection
After switching on the remote shutter, please open the phone Bluetooth settings, search for and connect to the “ATUMTEK” device. Once connected, the indicator light will turn off. The Remote will automatically connect with the same phone device after the first time connection.

• The Remote will automatically power off after 5mins no connection, indicator light will be off.
• If you have multiple ATUMTEK remotes, make sure to clear other devices or rename them for easy distinction.
• If the phone is connected with too many Bluetooth devices, please clear some first then try again.

Taking Pictures and Recording Videos
After connection, open the phone camera directly, then Press the remote button once to capture a photo. For video recording, select the video option in the phone camera and press the remote button once to start recording, finally press the button again to stop recording

Note:
The remote can only control the phone camera directly, and cannot control phone APPs.

Low Battery
The remote indicator light is off when the battery is low, and will not connect or take pictures

To replace the battery
Push the back cover of the remote control to open the remote battery then replace the cell battery with a new one (Model: 3V Lithium Battery CR2032). The new battery works for around 6 months.

About Android System Phone Connection

Some Android phones use phone volume buttons to control the camera or zoom. Please reset on phone camera settings, find the volume key function, and set the volume key function to shutter. (Do not select zoom or focus.)

IC Warning

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

• To access the ATUMTEK product instructions in different languages, please scan the QR code provided.
• Once scanned, you’ll be directed to a PDF document, which you can open in your browser and download for your reference.

Thank you for choosing ATUMTEK!

• ATUMTEK offers warranty coverage for all its branded products when purchased through authorized channels.
• Please reach out to our support team for assistance. [email protected].

Prolinx GmbH
Brehmstr. 56, 40239 Duesseldorf Germany.

Syncwire UK Ltd
C/O Lai and Co.109 Portland Street, Manchester, M1 6N.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>