ATUMTEK ATRL137 4 Rotatable Selfie Ring Light for Phone User Manual
- June 14, 2024
- ATUMTEK
Table of Contents
User Manual ATUMTEK Rotatable Selfie Ring Light
Product Introduction
Product Size | 10010049mm |
---|---|
Material | ABS+PC |
CRI (Ra) | >90 |
Power | 2W |
Input | 5V/1A |
Charging Port | USB Type-C |
Battery Capacity | 500 mAh |
Color Temperature | 2800-6300K |
*ATTENTION: Built-in battery type Do Not Suggest to use directly while charging.
Package Included
1. Brightness “-”
2. ON/OFF Button & Light Mode Toggle| 3. Brightness “+”
4. Charging Port
---|---
Selfie Ring Light Using Guide
Switch ON/OFF
Long press ON/OFF button for 1.5 seconds to turn light on/off.
Choose Light Mode
Lightly press Light Mode Toggle button (ON/OFF button) once to choose light
mode.
In total 3 Light Modes to choose, Cold Light/ Cold & Warm Light/Warm Light.
Also when you turn off and then switch on the ring light again, the memory
function will still remains the same light mode as last time.
Brightness Adjustment
When ring light is on, press “+” or “-” to adjust light brightness.
There are in total 5 levels of brightness to choose.
SOS Mode
When ring light is off, long press “+” button for 3 seconds, light will
flashes regularly and enter SOS mode;
Long press ON/OFF button for 2 seconds to turn off SOS mode.
Charging & Battery Capacity
Red charging indicator is on while charging, and light turns to be green
after get fully charged (around 160 mins). Once fully charged, ring light can
use for up to 90 mins.
Clip on And Rotate Ring Light
Clip ring light in front of phone or computer front camera, then rotate ring light to find best shooting angle.
IC Warning
This device complies with Industry Canada license-exempt RSS Standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
FCC Statement
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To access the ATUMTEK Rotatable Selfie Ring Light instructions in different
languages, please scan the QR code provided.
Once scanned, you’ll be directed to a PDF document, which you can open in your
browser and download for your reference.
|
---|---
http://qr61.cn/oPrKTI/qufhPLZ| http://qr61.cn/oPrKTI/qwknvMI
|
http://qr61.cn/oPrKTI/q4d11Y4| http://qr61.cn/oPrKTI/qxu2TQf
|
http://qr61.cn/oPrKTI/qlH3ONC|
Thank you for choosing ATUMTEK!
ATUMTEK provides warranty coverage of 36 month on all of its brand name
products purchased through authorized channels.
support@atumtek.com
Prolinx Gmbt
Brehmst.56, 40239 Duesseldorf Germary
Synewire UK Ltd
C/O. aiard Co.109 Porllard Street, Manchester, M1 6N