StarTech Com U02442-USB-EXTENDER USB 2.0 480 Mbps Active Cable User Guide

: June 13, 2024
: StarTech com

Table of Contents

Product Diagram
Package Contents
Requirements
Installation
CUSTOMERS SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

StarTech Com U02442-USB-EXTENDER USB 2.0 480 Mbps Active Cable

StarTech Com U02442-USB-EXTENDER USB 2.0 480 Mbps Active
Cable

Product Diagram

(U02442-USB-EXTENDER)

Front View

Product Diagram

Rear View

Product Diagram

Component|

Function

---|---
1| 4x USB-A Peripheral Ports|

Connect USB-A Peripheral devices
USB 2.0 (480 Mbps)
Supports up to 5 V and 0.5 A (2.5 W)

2| USB LED|

Indicates if a USB-A Peripheral is connected to the USB Active cable with USB Hub
Solid Green = Device connected
Off = No device connected

3| USB-A Host Cable|

Connect to a USB-A Port on a Host Computer
USB 2.0 (480 Mbps)

4| DC Power Port|

Connect the USB Active cable with USB Hub to a Power Source using the included Power Adapter
Recommended 5 V and 2 A

Package Contents

USB Active Cable with USB Hub x 1
Power Adapter x 1
Quick-Start Guide x 1

Requirements

For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/U02442-USB- EXTENDER

Computer with a USB-A Port
USB peripheral device with required USB-A cables

Warnings!
Read the entire Quick-Start Guide and ensure the instructions are fully understood before using this product.
Never operate this product if parts are missing or damaged.

Installation

Connect the USB-A Host Cable to a USB-A Port on the Host Computer. No drivers are needed for the USB active cable with USB hub.
Connect the Power Adapter to a Power Outlet and into the DC Power Port of the USB Active cable with USB Hub.
Connect a USB Peripheral Device to any of the four USB-A Peripheral Ports.
Note: Some USB peripheral devices may need drivers to finish their installation.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of thirdparty companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty

Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Regulatory Compliance
FCC – Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Symbol