KENDAL PF328-3LPA Circols 3-Light LED Pendant Instructions

KENDAL PF328-3LPA Circols 3-Light LED Pendant

Product Information

Model: PF328-3LPA-BLK/BRS

Safety Instructions

• CAUTION: All electrical connections should be done by a qualified electrician.
• Follow and save these instructions.
• Always disconnect power at circuit breaker or unplug from wall outlet before servicing.

Product Usage Instructions

Installation:

1. Attach the mounting plate to the junction box with the screws provided.
2. Before installation on the ceiling, adjust fixtures to the desired length by pushing the wire up into the canopy, then coiling up excess wire. Minor adjustments can be made after installation. To lower or lengthen the wire, loosen the screw where the wire comes out of the canopy.

Wiring:

Line wire (Black)

Neutral wire (White)

1. Connect the GROUND WIRE from the junction box to GROUND (or GREEN) with a wire nut.
2. Connect the NEUTRAL WIRE from the junction box to NEUTRAL (WHITE) wire from the fixture with a wire nut.
3. Connect the LINE WIRE from the junction box to LINE (BLACK) wire from the fixture with a wire nut.

Fixture Attachment:

1. Attach the fixture to the mounting plate with the screws provided.
2. Due to the lightweight aluminum material, it may be necessary to make small adjustments in order to get the individual lights to hang straight. This can be done by making small adjustment turns to the wire where it goes into the canopy.

Dimming:

• This fixture is designed to dim with a standard Triac forward phase dimmer. Dimming levels will vary by dimmer.
• Recommended dimmers:
  • Lutron DVCL-153P
  • Lutron CTCL-153P
  • Lutron SCL-153P
• Or other compatible LED dimmer controls. Wattage should not exceed 150 watts of product for a 600 watt dimmer.

Unpack your fixture, you should have the following items:

• A.Screws
• B.Mounting plate
• C.Fixture

Parts bag

1. Screws 6PCS
2. Wire nuts 3PCS
3. Screw anchors. 4PCS

INSTALLATION INSTRUCTION

• Before installation to ceiling,adjust fixtures to desired length by pushing wire up into canopy,then coiling up excess wire, minor adjustment can be made after installation.To lower or lengthen wire,loosen the screw where wire comes out of canopy.

• Insert the button stop with lanyard into one of the slots in the mounting plate and lay it flat so it will not fall back through the hole. This will help take the weight of the fixture while making wiring connections.

• Connect the GROUND WIRE from junction box to GROUND (or GREEN) with a wire nut. Connect the NEUTRAL WIRE from junction box to NEUTRAL (WHITE) wire from fixture with a wire nut.Connect the LINE WIRE from junction box to LINE (BLACK) wire from fixture with a wire nut.

• Attach the fixture to the mounting plate with screws provided.

• Due to the light weight aluminium material, It may be necessary to make small adjustments in order to get the individual lights to hang straight. This can be done by making small adjustment turns to the wire where it goes into the canopy.

• Recommended dimmers:

  • Lutron DVCL-153P
  • Lutron CTCL-153P
  • Lutron SCL-153P

• Or other compatible LED dimmer controls Wattage should not exceed 150 watts of product for a 600 watt dimmer.

• FINISH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>