KENDAL LIGHTING PF321-9LPA PHAEDRA 9 Light LED Pendant Pan Instruction Manual
- June 13, 2024
- KENDAL LIGHTING
Table of Contents
KENDAL LIGHTING PF321-9LPA PHAEDRA 9 Light LED Pendant Pan Instruction
Manual
Safety Instructions
- CAUTION : All electrical connections should be done by a qualified electrician.
- Follow and save these instructions.
Always disconnect power at circuit breaker or unplug from wall outlet before servicing.
Unpack your fixture, you should have the following items:
A. Mounting plate(Support de fixation)
B. Fixture (Apparel)
Parts bag
- Screws 2PCS(Vis 2PCS)
- Wire nuts 3PCS(serre -fils 3PCS)
Attach the mounting plate to junction box with screws provided.
Before installation to ceiling, adjust fixtures to desired length by pushing wire up into canopy, then coiling up excess wire, minor adjustment can be made after installation. To lower or lengthen wire, depress button sleeve located where wire comes out of canopy
Connect the GROUND WIRE from junction box to GROUND (COPPER or GREEN) wire
from fixture with a wire nut. Connect the NEUTRAL WIRE from junction box to
NEUTRAL (WHITE) wire from fixture with a wire nut. Connect the LINE WIRE from
junction box to LINE (BLACK) wire from fixture with a wire nut.
Attach the fixture to the mounting plate with cap nuts provided.
This fixture is designed to dim with a standard
Triac forward phase dimmer. Dimming levels will vary by dimmer.
Recommended dimmers:
- Lutron SCL-153P
- Lutron TGCL-153P
- Lutron MACL-153M
Or other compatible LED dimmer controls
Wattage should not exceed 150 watts of product for a 600 watt dimmer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>