KENDAL LIGHTING PF321-9LBR-BLK 9 Light LED Pendant Light Bar Instructions
- June 13, 2024
- KENDAL LIGHTING
Table of Contents
KENDAL LIGHTING PF321-9LBR-BLK 9 Light LED Pendant Light Bar Instructions
Safety Instructions
- CAUTION: All electrical connections should be done by a qualified electrician.
- Follow and save these instructions.
- Always disconnect power at circuit breaker or unplug from wall outlet before servicing.
Assembly Instructions
Unpack your fixture, you should have the following items:
Parts bag
- Screws4PCS(Vis 4PCS)
- Wire nuts 3PCS(serre-fils 3PCS)
- Screw anchors. 2PCS (Anchors baiser 2PCS)
Attach the mounting plate to junction box with screws provided.
Before installation to ceiling,adjust fixtures to desired length by pushing wire up into canopy,then coiling up excess wire, minor adjustment can be made after installation.To lower or lengthen wire,depress button sleeve located where wire comes out of canopy.
Connect the GROUND WIRE from junction box to GROUND (COPPER or GREEN) wire from fixture with a wire nut. Connect the NEUTRAL WIRE from junction box to NEUTRAL (WHITE) wire from fixture with a wire nut.Connect the LINE WIRE from junction box to LINE (BLACK) wire from fixture with a wire nut.
Attach the fixture to the mounting plate with cap nuts provided.
This fixture is designed to dim with a standard
Triac forward phase dimmer. Dimming levels will vary by dimmer.
Recommended dimmers:
Lutron SCL-153P
Lutron TGCL-153P
Lutron MACL-153M
Or other compatible LED dimmer controls
Wattage should not exceed 150 watts of product for a 600-watt dimmer.