KENDAL LIGHTING MSAR26 Cross Corner Instructions
- June 13, 2024
- KENDAL LIGHTING
Table of Contents
KENDAL LIGHTING MSAR26 Cross Corner
PARTS INCLUDED
DIMENSIONS
INSTALLATION
-
STEP 1 REMOVE END CAP FROM TRACK
-
STEP 2 INSTALL THE MSA22 PIN SET(b) INTO THE PIN CONNECTOR HOLES (c) ON THE TRACK. SLIDE THE TRACK CONNECTOR (a) WISOLY SEETERNSE BACK OF THE TRACK SO YOU CAN STILL VISIBLY SEE THE PINS.
-
STEP 3 UP THE STONE RACK WITH THE BY COMETO HINES ON THE MSAR26 CROSS CORNER AND PUSH TOGETHER.
ATTENTION:
WHEN JOINING TRACKS OR ACCESSORIES UTILIZING PIN CONNECTORS, MAKE SURE PINS ARE HORIZONTAL AND LINE UP WITH PIN CONNECTOR HOLES. YOU MAY NEED TO GENTLY PUSH UP OR DOWN ON THE PINS SO THEY LINE UP CORRECTLY. FAILING TO DO THIS MAY RESULT IN PINS MISSING THE PIN CONNECTOR HOLES AND LOSS OF THE 24 VOLT CONNECTION.
-
STEP 4 SLIDE THE TRACK CONNECTOR (a) ONTO THE CROSS CORNER AND SECURE WITH SET SCREWS.
-
STEP 5 REPEAT STEPS 1 THROUGH 4 FOR OTHER THREE SIDES OF THE TRACK CORNER AND COMPLETE THE TRACK CORNER CONNECTION.
NOTE:
AFTER EACH TRACK CONNECTION A CONTINUITY TEST SHOULD BE DONE TO ENSURE PROPER
ELECTRICAL CONNECTIONS WERE MADE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>