KENDAL LIGHTING PF305 Biza LED Pendant Light Instructions

Table of Contents

Product Model: PF305 PF306
Safety Instructions:
- CAUTION: All electrical connections should be done by a qualified electrician.
- Follow and save these instructions.
- Always disconnect power at the circuit breaker or unplug it from the wall outlet before servicing.
Mounting plate: The mounting plate should be attached to the junction box using the screws provided.
Wire Adjustment: Before installation, adjust the fixtures to the desired length by pushing the wire up into the canopy and then coiling up the excess wire. Minor adjustments can be made after installation. To lower or lengthen the wire, depress the button sleeve located where the wire comes out of the canopy.
Electrical Connections:
- Connect the GROUND WIRE from the junction box to the GROUND (COPPER or GREEN) wire from the fixture using a wire nut.
- Connect the NEUTRAL WIRE from the junction box to the NEUTRAL (WHITE) wire from the fixture using a wire nut.
- Connect the LINE WIRE from the junction box to the LINE (BLACK) wire from the fixture using a wire nut.
Fixture Attachment: Attach the fixture to the mounting plate using the screws provided.
Dimming Capability: This fixture is designed to dim with a standard Triac forward phase dimmer. Dimming levels will vary by dimmer.
Recommended Dimmers:
- Lutron DVCL-153P
- Lutron PD-6WCL
- Lutron MACL-123M
- Or other compatible LED dimmer controls
Wattage Limit: The wattage should not exceed 150 watts of product for a 600 watt dimmer.

Ensure all electrical connections are done by a qualified electrician.
Before installation, attach the mounting plate to the junction box using the provided screws.
Adjust the fixtures to the desired length by pushing the wire up into the canopy and coiling up any excess wire. Minor adjustments can be made after installation.
To lower or lengthen the wire, depress the button sleeve located where the wire comes out of the canopy.
Connect the GROUND WIRE from the junction box to the GROUND (COPPER or GREEN) wire from the fixture using a wire nut.
Connect the NEUTRAL WIRE from the junction box to the NEUTRAL (WHITE) wire from the fixture using a wire nut.
Connect the LINE WIRE from the junction box to the LINE (BLACK) wire from the fixture using a wire nut.
Attach the fixture to the mounting plate using the provided screws.
If dimming is desired, use a standard Triac forward-phase dimmer. Refer to the recommended dimmers list for compatible options.
Ensure the total wattage of the product does not exceed 150 watts for a 600-watt dimmer.

CAUTION: All electrical connections should be done by a qualified electrician.
Follow and save these instructions.
Always disconnect the power at the circuit breaker or unplug it from wall outlet before servicing

Unpack your fixture, you should have the following items:

Attach the mounting plate to the junction box with the screws provided
Before installation to ceiling, adjust fixtures to the desired length by pushing wire up into the canopy, then coiling up excess wire, minor adjustments can be made after installation.To lower or lengthen wire, depress button sleeve located where the wire comes out of the canopy
Connect the GROUND WIRE from the junction box to the GROUND (COPPER or GREEN) wire from the fixture with a wire nut. Connect the NEUTRAL WIRE from the junction box to the NEUTRAL (WHITE) wire from the fixture with a wire nut. Connect the LINE WIRE from the junction box to the LINE (BLACK) wire from the fixture with a wire nut.
Attach the fixture to the mounting plate with screws provided.

This fixture is designed to dim with a standard Triac forward phase dimmer. Dimming levels will vary by dimmer.

Recommended dimmers: