KENDAL LIGHTING PF57-1LPR North Coast Lighting Instructions
- June 13, 2024
- KENDAL LIGHTING
Table of Contents
KENDAL LIGHTING PF57-1LPR North Coast Lighting
Safety Instructions
- CAUTION: All electrical connections should be done by a qualified electrician.
- Follow and save these instructions.
- Always disconnect power at circuit breaker or unplug from wall outlet before servicing.
Unpack your fixture, you should have the following items:
A. Bottom glass shade
B. Cap nuts
C. Metal lampholder
D. Upper glass shade
E. Mounting plate
F. Canopy
Parts bag
- Screws 2 pcs
- Wire nuts 3 pcs
* PR20 bulb not included (Ampoule de PR20 non inclus)
Install PAR 20 MAX 50W bulb.
Insert bottom glass shade to the metal lampholder, and fix it by cap nuts provided.
Insert upper glass shade gently into the metal lampholder.
Connect the GROUND WIRE(Green or Copper) from junction box to GROUND WIRE(Labeled) from fixture by using a wire nut. Connect the NEUTRAL WIRE(White wire) from junction box to NEUTRAL WIRE(Labeled) from fixture with a wire nut. Connect the LINE WIRE(Black wire) from junction box to LINE WIRE(Labeled) from fixture with a wire nut
Before installation to ceiling, adjust fixtures to desired length by pushing wire up into canopy, then coiling up excess wire, minor adjustment can be made after installation. To lower or lengthen wire, depress button sleeve located where wire comes out of canopy.
Attach the canopy to the mounting plate with screws provided.