KENDAL LIGHTING MSAR14-BLK Outer Corner Instructions
- June 13, 2024
- KENDAL LIGHTING
Table of Contents
KENDAL LIGHTING MSAR14-BLK Outer Corner
PARTS INCLUDED
DIMENSIONS
INSTALLATION INSTRUCTION
STEP 1 REMOVE THE END CAP FROM TRACK
STEP 2
INSTALL THE MSA22 PIN SET(b) INTO THE PIN CONNECTOR HOLES (c) ON THE TRACK.
SLIDE THE TRACK CONNECTOR (a) INTO THE SLOT ON THE BACK OF THE TRACK SO YOU
CAN STILL VISIBLY SEE THE PINS.
STEP 3
SLIDE OUTER CORNER ONTO THE TRACK CONNECTOR (a) WHILE CAREFULLY LINING UP
THE PIN SET WITH THE PIN CONNECTOR HOLES ON THE MSAR14 OUTER CORNER.
ATTENTION:
WHEN JOINING TRACKS OR ACCESSORIES UTILIZING PIN CONNECTORS, MAKE SURE PINS
ARE HORIZONTAL AND LINE UP WITH PIN CONNECTOR HOLES. YOU MAY NEED TO GENTLY
PUSH UP OR DOWN ON THE PINS SO THEY LINE UP CORRECTLY FAILING TO DO THIS MAY
RESULT IN PINS MISSING THE PIN CONNECTOR HOLES AND LOSS OF THE 24-VOLT
CONNECTION.
STEP 4
SLIDE THE TRACK CONNECTOR (a) TOWARDS THE OUTER CORNER APPROXIMATELY
HALFWAY AND SECURE WITH 4 SCREWS.
STEP 5
REPEAT STEPS 1 THROUGH 4 FOR THE OTHER SIDE OF THE TRACK CORNER AND
COMPLETE THE TRACK CORNER CONNECTION.
NOTE:
AFTER EACH TRACK CONNECTION A CONTINUITY TEST SHOULD BE DONE TO ENSURE
PROPER ELECTRICAL CONNECTIONS WERE MADE.