KENDAL LIGHTING PF307-BLK TWIST 32 Inch LED Pendant Instruction Manual
- June 13, 2024
- KENDAL LIGHTING
Table of Contents
KENDAL LIGHTING PF307-BLK TWIST 32 Inch LED Pendant Instruction Manual
Safety Instructions
- CAUTION: All electrical connections should be done by a qualified electrician.
- Follow and save these instructions.
- Always disconnect power at circuit breaker or unplug from wall outlet before servicing.
Unpack your fixture, you should have the following items:
A. Mounting plate(plaque de montage)
B. Fixture (Appareil)
Parts bag
- Screws 4PCS(Vis 4PCS)
- Wire nuts 3PCS(serre- fils 3PCS)
- Screw anchors. 4PCS(Anchirs baiser 4PCS)
Attach the mounting plate to junction box with screws provided.
Fixez la plaque de montage sur la boîte de jonction avec les vis fournies.
Before installation to ceiling, adjust fixtures to desired length by pushing wire up into canopy, then coiling up excess wire, minor adjustment can be made after installation. To lower or lengthen wire, depress button sleeve located where wire comes out of canopy.
Connect the GROUND WIRE from junction box to GROUND (COPPER or GREEN) wire
from fixture with a wire nut. Connect the NEUTRAL WIRE from junction box to
NEUTRAL (WHITE) wire from fixture with a wire nut. Connect the LINE WIRE from
junction box to LINE (BLACK) wire from fixture with a wire nut.
Attach the fixture to the mounting plate with screws provided.
The height of the center bar can be adjusted if needed.
This fixture is designed to dim with a standard
Triac forward phase dimmer. Dimming levels will vary by dimmer.
Recommended dimmers:
- Lutron DVCL-153P
- Lutron PD-6WCL
- Lutron MACL-123M
Or other compatible LED dimmer controls
Wattage should not exceed 150 watts of product for a 600 watt dimmer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>