KENDAL LIGHTING PF265-8LRT Chandeliers Instruction Manual
- June 1, 2024
- KENDAL LIGHTING
Table of Contents
KENDAL LIGHTING PF265-8LRT Chandeliers
Safety Instructions
- CAUTION: All electrical connections should be done by a qualified electrician.
- Follow and save these instructions.
- Always disconnect power at circuit breaker or unplug from wall outlet before servicing.
Unpack your fixture, you should have the following items:
Fixture with mounting plate attached to the canopy.
Parts bag
A| Wire nuts| 3 pcs|
---|---|---|---
B| Junction box screw| 2 pcs|
C| Wall plug + Screw| 4 pcs|
D| Gloves 1 pair| 1 pair|
Mounting Instruction
Remove the mounting plate from the canopy.
This fixture is a 3CCT selectable model. Default color temperature is 3000K.
You can shift to 4000K or 5000K by sliding the the switch.
Before installation to ceiling, adjust fixtures to desired length by pushing
wire up into canopy, then coiling up excess wire, minor adjustment can be made
after installation. To lower of lengthen wire, depress button sleeve located
where wire comes out of canopy.
Attach the mounting plate to the junction box and ceiling with the wall plugs
and screws provided.
Attach the hooks on the fixture to the safety cable rings in the mounting
plate to help hold the fixture while making the wiring connections.
Connect the GROUND WIRE from junction box to GROUND (or GREEN) wire from
fixture with a wire nut. Connect the NEUTRAL WIRE from junction box to NEUTRAL
(WHITE) wire from fixture with a wire nut. Connect the LINE WIRE from junction
box to LINE (BLACK) wire from fixture with a wire nut.
Install the canopy to mounting plate with cap nuts provided.
This fixture is designed to dim with a standard Triac forward phase dimmer.
Recommended dimmers:
Lutron MACL-153M, Lutron DVCL-153P, Lutron SCL-153P.
Or other compatible LED dimmer controls. Wattage should not exceed 150 watts
of product for a 600 watt dimmer. Dimming levels will vary by dimmer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>