alpha DPX 1350W Downconverter Instruction Manual

: June 13, 2024
: Alpha

Table of Contents

alpha DPX 1350W Downconverter
Product Information
Product Usage Instructions
DPX 1350W Downconverter
Read User Manual Online (PDF format)
Download This Manual (PDF format)

alpha DPX 1350W Downconverter

alpha-DPX-1350W-Downconverter-product

Product Information

The DPX 1350W Downconverter is a power conversion device that allows you to convert electrical input voltage into desired output voltage. It is designed to provide a total power output of 1350W, with each port capable of delivering up to 450W. The downconverter operates at an output current of 9.4A and offers load regulation for stable power delivery. It also includes acoustic features for noise reduction.

Product Usage Instructions

Ensure that the electrical input voltage matches the specifications mentioned in the user manual.
Connect the DPX 1350W Downconverter to the power source using the appropriate power cables.
Verify that the output voltage setting is suitable for your requirements. Use the adjustment controls provided to modify the output voltage if needed.
Make sure to distribute the load evenly among the available ports to prevent overloading.
Activate the downconverter by turning on the power switch or following the specific activation procedure mentioned in the user manual.
Monitor the load and output power using the built-in monitoring features, if available.
If any abnormal conditions occur, such as overcurrent or overheating, the downconverter will activate its protection mechanisms to prevent damage. Refer to the user manual for more information on protection features.

For further details on operating and maintaining the DPX 1350W Downconverter, please refer to the complete user manual.

DPX 1350W Downconverter

IP68 rated enclosure provides maximum flexibility for various installation options (pole, wall, underground, or aerial)
Extended operating temperature range up to 65°C (149°F) for deployment in the harshest outdoor environments
Remote monitoring via the Cordex® CXC HP system controller offers advanced monitoring and control of each of the four output channels including power cycling, load shedding, voltage, and current readings
Class 4 rated input circuit for fault managed safety
Four outputs to power multiple devices from a single source

The DPX 1350W Downconverter is part of the distributed power transport product family specifically engineered using the new Alliance for Telecommunications Industry Solutions
(ATIS) fault managed power distribution technology. The DPX 1350W Downconverter converts the incoming (±190 Vdc) voltage to 48 Vdc to power a multitude of communications devices such as small cells, remote radio heads (RRH), and IoT devices.
The DPX 1350W Downconverter provides four isolated outputs from a single 12 AWG (4 mm²) or 14 AWG (2.5 mm²) hybrid or copper only cable input. Each isolated output can deliver a maximum of 450 watts at 48 Vdc or 1350 watts of total power to remote telecommunication equipment. The DPX 1350W Downconverter provides full power up to 55°C (131°F).
Distributed power transport architecture enables operators to deploy their network faster by eliminating the need to have AC utility power at each small cell location. At a central location, the central power hub converts the incoming AC power to fault managed power which is transported over a hybrid or copper only cable to a disconnect box and then to a down converter device located approximately 6000 ft away. This reduces installation and operating expenses, and provides flexibility related to site selection for the installation of the remote communications equipment.

DPX 1350W Downconverter

PN: 0120084-001

Electrical| | Mechanical|
---|---|---|---
Input Voltage| ±145 Vdc to ±200 Vdc| Dimensions H × W × D| 203.2 × 457.2 × 109 mm (8 × 18 × 4.3 in.)|
Output Voltage| –54 Vdc| Weight| 9 kg (19.8 lb)|
Output Power| Total: 1350 W| Connections| Input: 1|
Per Port: 450 W| Output: 4 (isolated)|
Output Current| 9.4 A| Environmental|
Load Regulation| <±3%| Temperature| Operation: –40 to 65°C (–40 to 149°F); full rated output up to 55°C (131°F)|
Acoustic| 0 dB|
Storage: –40 to 85°C (–40 to 185°F)|
Features|
Relative Humidity| 5 to 95%|
Adjustments|