Light4me COB 30 RGB Strong Light Par User Manual
- July 26, 2024
- LIGHT4ME
Table of Contents
LIGHT4ME COB 30 RGB
User Manual
Safety rules
| Please read the user manual in detail before use. Please also keep it
for future reference. The man- ual contains rules for the safe use of the
device.
---|---
| WARNING! THE DEVICE MUST NOT BE DISPOSED OF WITH HOUSEHOLD WASTE.
This symbol
indicates that this product must not be disposed of with household waste,
according to the EU and your national law. In order to prevent potential
damage to the environment or health, the used product must be recycled. In
accordance with current legislation, unusable electrical and electronic
devices must be collected separately at the designated facilities for
recycling, acting on the basis of applicable environmental standards.
| The product described in this manual comply with European directives
and it is therefore CE marked.
| Keep the device away from children and unqualified persons. The
manufacturer is not liable for dam- age caused by improper use.
| Before use, make sure the housing is not damaged.
| Ensure a minimum distance of 1 m between the device and flammable
materials.
| **** The device operates on the power supply marked on the housing – do not connect to a power supply with different parameters. Ensure that the device and the power source are grounded. Disconnect the device from the power supply before removing the housing or performing maintenance. If interfer- ence occurs during operation, immediately disconnect the power cable from the power source!
| The device for outdoor and indoor use, do not expose to prolonged moisture. Do not expose the prod- uct to direct sunlight or other lighting devices.
| Do not look directly into the light source – the light may cause an
epileptic attack in light-sensitive people or people with epilepsy. Compliance
with this rule is mandatory.
| Do not install the device on a surface subjected to vibration.
The optimal ambient operating tempera- ture of the device is -15°C – 40°C. Do
not touch the light surface after prolonged use of the device, as it can heat
up to 60°C! Do not use the device for more than 10 hours!
| When the device is hanged, attach the safety rope to a suitable
mounting point.
Maintenance
- The device may only be used by qualified personnel, damage caused by improper use or attempted repair is not covered by the warranty. There are no service parts inside the packaging, repairs may only be carried out by authorized service center.
- Do not allow light source to come into contact with oil, grease or any similar liquid.
- Regular cleaning allows of long term use and maintains proper brightness. Use a soft cloth to clean the light source.
Technical specification
Parameter | Value |
---|---|
Power supply | AC100-240V, 50/60Hz |
Power | 30W |
Light source | 3-in-1 RGB COB LED |
Dimensions | 13 x 13 x 13 cm |
Weight | 0.58 kg |
Menu structure
To control the device through the control panel, use one of the four buttons next to the display.
Button | Function |
---|---|
Selects operation mode or returns to previous menu option | |
Increases the value of the specified parameter | |
Decreases the value of the specified parameter | |
Activates the option and approves the changes | |
Menu option | Values |
--- | --- |
A001-A512 | A001~A512 |
Au** | Au01~Au07 |
FF** | FF01~FF99 |
CC** | CC01~CC99 |
EE** | EE01~EE99 |
F*** | F001~F009 |
F010~F255 | Strobe effect |
AuTo | AuTo |
Soud | Soud |
VOL1~VOL9 | Mic sensitivity setting |
DMX structure
7-channel mode
Nr kanału| Function| Values| Description
1| Master Dimmer| 0-255| Master Dimmer – 0-100%
2| Red| 0-255| Red color dimmer – 0-100%
3| Green| 0-255| Green color dimmer – 0-100%
4| Blue| 0-255| Blue color dimmer – 0-100%
5| Strobe| 0-255| Strobe – slow-fast
6| Auto mode| 0-255| Auto mode programs
7| Auto mode speed| 0-255| Auto mode program speed – slow-fast
Remote control
ON/OFF – device on/off | Green – green color |
---|---|
DMX ON/OFF – DMX on/off | Blue – blue color |
Auto – Auto mode | Rose – pink color |
Jump – Jump mode | Amber – amber color |
Fade – Fade mode | Cyan – cyan (light blue) color |
Strobe – Strobe mode | White – white color |
Sound – Sound mode | ◄ – – speed decrease |
Red – red color | +► – speed increase |
Information about used electrical and electronic equipment
The main goal of European and national law regulations is to reduce the amount of waste produced from used electrical and electronic equipment, to ensure an appropriate level of collection, recovery and recycling of used equipment, and to increase public awareness of its harmfulness to the environment, at each stage of use of electrical and electronic equipment. Therefore, it should be pointed out that households play a key role in contributing to reuse and recovery, including recycling of used equipment. The user of electrical and electronic equipment – intended for households – is obliged to return it to authorized collector after its use. However, it should be remembered that products classified as electrical or electronic equipment should be disposed of at authorized collection points.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>