ITC 690471 Compel Linear Light Installation Guide
- June 3, 2024
- ITC
Table of Contents
ITC 690471 Compel Linear Light
PARTS/TOOLS NEEDED
General Considerations
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- Do not install any luminaire assembly closer than 6” from any combustible materials.
- Max voltage: 12V DC ± 20%
- Operating temperature: -20° to 50°C
- Dimmable: 10% to 100%
- Product is designed for interior use only
INSTALLATION
-
Determine the installation location and mark the clip locations. Drill pilot holes and screw in the mounting clips using the provided screws.
-
Using the wiring diagram below, wire the light to the unit’s power.
-
Snap light into mounting clips.
For warranty information please visit www.itc-us.com/warranty-return- policy
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>