OLIMPIA SPLENDID DOLCECLIMA Portable Air Conditioner User Manual
- June 12, 2024
- OLIMPIA SPLENDID
Table of Contents
OLIMPIA SPLENDID DOLCECLIMA Portable Air Conditioner
WARNINGS
- Not all versions of iOS and Android are compatible with the app. We will not be responsible for any issue resulting from this incompatibility. The APP is subject to updates without notice. Check compatibility with the operating system of your device before installing it on the device itself.
- Smart kit only supports WPA-PSK/WPA2-PSK encryption. Do not use any other type of encryption.
- Make sure that the camera of the device on which the app is going to be used is at least a 5 million pixels camera, in order to be able to read the QR code.
- Due to the different network conditions, a request time-out may occur. In this case, it’ll be necessary to repeat the network configuration procedure.
- Due to the different network conditions, a time-out could occur during the control process.
- The procedure for installation and configuration of the APP may be slightly different from what is described and installed on this manual. Proceed as indicated in the APP.
Please keep you APP up to data with the letest version. We will not be responsible for issues caused by the internet, by the Wi-Fi router and by smart devices. Please contact the original provider for assistance.
DOWNLOADING AND INSTALLING THE APP
- a. Open “App Store” or “Google Play” respectively.
- b. Search the “OS Comfort” app.
- c. Download the app.
As an alternative, it is possible to scan the following QR codes:
NETWORK CONFIGURATION
It is necessary to make sure that the Android or iOS device connects solely to the Wi-Fi network the user wants to configure. Make sure that the Android or iOS device Wi-Fi function works correctly and that the device automatically reconnects to the original Wi-Fi network. The air conditioner cannot be controlled by the remote while under configuration.
- a. Make sure that the device is connected to a Wi-Fi router. Make sure that the Wi-Fi router is connected to the internet before proceeding with the user registration and the network configuration.
- b. Click on “Create account”.
- c. Enter your own e-mail and password, then click on ”Registration”.
- d. After performing registration, a confirmation mail is sent to the entered e-mail address.
View the mail and confirm registration by clicking on the specific link.
Network configuration through Bluetooth
-
a. Click on “+ Add device”.
-
b. Click on “Scan for nearby devices”.
Make sure the appliance is in “scan for WiFi” mode; to activate this function on your own appliance, please consult the manual for use and maintenance. -
c. Wait for loading of the devices, then click on your device to make it connect.
-
d. Select the Wi-Fi network.
-
e. Enter the Wi-Fi network password, then click on “OK”.
-
f. Wait for a connection to the network. Once loading is complete, it is possible to change the name of the connected appliance; the appliance appears on the list.
Use of the device
-
a. Make sure that the device is connected to the Wi-Fi network the user wants to use.
If another Wi-Fi network disturbs the configuration process, it is necessary to remove it from your device. -
b. Click on “+ Add device”.
-
c. Select the device.
-
d. Follow the instructions described in the app and click on “Next”.
-
e. Click on “Scan QR code on the unit”.
-
f. Scan the code located on the appliance.
Scan of the QR code is only valid for the Android system; for the iOS system, directly consult step “g”. -
g. Select the Wi-Fi network.
-
h. Enter the Wi-Fi network password and click on “OK”.
-
i. If the configuration has been successful, the appliance is displayed in the list.
- Once the network configuration is over, the app notifies the end of the operation on the screen.
- Due to the different network conditions, the device status could still appear as “offline” after configuration.
- In this case, update the list of the devices registered on the app and make sure they are “online”.
- Alternatively, disconnect and reconnect the air conditioner power cord.
- After a few minutes, the air conditioner will appear as “online”.
HOW TO USE APP
Make sure the mobile device and the air conditioner are connected to the Internet before using the app in order to control the air conditioner via internet (the WiFi symbol must be illuminated on the display), follow the steps below:
- a. Digit your account user name and password. Click on “Sign in” afterwards.
- b. Select the air conditioner that you want to control with the app to access to the main control interface.
- c. From this screen, the user can check the air conditioner status (“ON” or “OFF”), its operation mode, temperature, fan speed, etc. To display all the functions, slide your finger on the icons bar from left to right (and vice versa).
Some app functions could not be available on a certain air conditioner. Consult the instructions manual for more information.
SPECIAL FUNCTIONS
The app allows to control the air conditioner special function too, such as:
- a. Timer ON / Timer OFF
- b. Sleep
- c. Check
- d. Share Device
If the air conditioner doesn’t support one of the functions indicated above, this won’t be displayed in the special functions list.
To access to the special functions screen, click on the icon in the top right
corner of the main control interface.
Timer ON / Timer OFF
Weekly, the user can set the air conditioner so that it turns on or off at
a particular hour of one or more days.
Sleep
The user can set the ideal temper-ature that the air conditioner will
maintain during nighttime.
Check
With this function, the user can easily check the air conditioner’s correct
functioning. Once the operation is over, the app shows normal and abnormal
functioning elements.
Share Device
The air conditioner can be controlled by multi-users at the same time by
Share Device function. Click on “Share QR code” and the code linked to the
selected appliance appears.
The other users, with their device, must click “Add shared device” in the Home
screen, then scan the QR code.
FINAL WARNINGS
This product complies with Part 15 of the FCC Rules (Federal Communications
Commission) RSS-210 (Radio Standards Specifications) of Industry & Science
Canada.
The user must observe two fundamental requirements in order to be able to use
the product:
- this product may not cause harmful interferences;
- this product must accept any kind of received interference, including those which could cause an undesired operation.
ALWAYS use the product respecting the supplied instructions. This product complies with FCC and IC (Industry Canada) radiation exposure limits set forth for an uncontrolled environment. In order to avoid exceeding the FCC and IC radio frequency exposure limits, a distance of at least 20 cm must be kept from the antenna during normal operation. Changes or modifications not expressly approved by the parties responsible for compliance could void the user’s authority to use the appliance.
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or en experienced radio/TV technician for help.
Company will not be liable for any issues and problems caused by Internet, Wireless Router and Smart Devices. Please contact the original provider to get further help. This manual has been created for informative purpose. The company declines every responsibility for the results of projecting or installation based on the explanations and the technical specifications given in this manual. Is besides forbidden the reproduction under any form of the texts and of the figures contained in this manual.
OLIMPIA SPLENDID spa
via Industriale 1/3
25060 Cellatica (BS)
www.olimpiasplendid.it
info@olimpiasplendid.it
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>