FORTIN EVO 107861 Universal Immobilizer Bypass Module Installation Guide

FORTIN EVO 107861 Universal Immobilizer Bypass Module

Product Information

Product Usage Instructions

1. To add the firmware version and options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
2. Program the bypass option by following these steps:
   • Set UNIT OPTION to C1.
   • If the vehicle is not equipped with a functional hood pin, set FUNCTION A11 to OFF.
3. If the vehicle can be remote started with the hood open, set FUNCTION A11 to OFF.
4. Notice: The installation of safety elements is mandatory. The hood pin is an essential security element and must be installed.
5. THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

Wiring Connections

Pink/Black/Purple/Yellow/Green/White/Green/Red/White/Black/Lt.Blue

REGULAR INSTALLATION

Parts required (Not included)

• 1x Relay (Trunk release)

NOTES
The vehicles OEM remote will not be operable during remote start.

MANDATORY INSTALL

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

1. BCM
2. Ignition switch
3. Clutch switch

AUTOMATIC TRANSMISSION WIRING CONNECTION

MANUAL TRANSMISSION WIRING CONNECTION

DCRYPTOR PROGRAMMING PROCEDURE

Parts required (not included)

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.

1. Press and hold
   Insert the programming button: the 4-Pin (Data-Link) connector.

2. The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

3. Release the programming button when the LED is BLUE.
   If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.

4. Insert the required remaining connectors.

5. Turn the key to the ON/RUN position.

   • The BLUE LED will turn OFF.
     Wait,

   • The BLUE LED will flash rapidly.
     KEY BYPASS PROGRAMMING PROCEDURE 2/3

6. Turn the ignition to the OFF position.

   • The RED LED will turn ON.

7. Turn the key to the ON/RUN position.

   • The YELLOW LED will turn ON.
   • The RED LED will flash once.

8. Turn the ignition to the OFF position.

   • The YELLOW LED will turn OFF.

9. Turn the key to the ON/RUN position.

   • The YELLOW LED will turn ON.
   • The RED LED will flash once.

10. Turn the ignition to the OFF position.

11. Disconnect all the connectors and after the Data-Link (4-pins) connector.

12. Use the tool:
    FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
    Parts required (not included)

13. The DCryptor process can take up to 15 minutes.
    AFTER DCRYPTOR PROGRAMMING COMPLETED
    Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.

The module is now programmed.

REMOTE STARTER
Test the remote starter. Remote start the vehicle.

REMOTE STARTER FUNCTIONALITY

Module label

Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our website on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer-safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Copyright © 2006-2019, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT

Tél: 514-255-HELP (4357) 1-877-336-7797

www.fortinbypass.com

WEB UPDATE

This guide may change without notice. See www.fortin.ca for latest version.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>