FORTIN EVO 107851 High Encrypted Key Immobilizer Bypass Module Installation Guide

FORTIN EVO 107851 High Encrypted Key Immobilizer Bypass Module

Product Information

• Product Name: Immobilizer bypass
• Compatibility: VEHICULES NISSAN Versa 2022-2023
• Model: EVO-ONE
• Manufactured after: 2019
• Firmware Version: 72.[54] (minimum required)
• Manufacturer: FORTIN.CA
• Serial Number: 000000 00000

Product Usage Instructions

1. To add firmware version and options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool (sold separately).
2. Program the bypass option: – If the vehicle is not equipped with a functional hood pin, set A11 to OFF. – If the vehicle can be remote started with the hood open, install the hood pin switch (included) and set A11 to OFF.
3. Program remote starter options: – For automatic transmission mode, cut the loop. – For heated seats, program option 39.
4. Parts required for installation (not included): – 1x Manual transmission: Relay (Trunk release) – HOOD PIN CONTACT (if applicable) – SECURITY STICKER (included)
5. Ensure that this module is installed by a qualified technician to avoid permanent damage to the vehicle.
6. The OEM remote of the vehicle will not be operable during remote start. Note: The provided text extract contains additional technical details and wiring information that may require further consultation with the full user manual for proper installation and usage guidance.

REGULAR INSTALLATION

DESCRIPTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

MANUAL TRANSMISSION WIRING CONNECTION

DCRYPTOR PROGRAMMING PROCEDURE

1. Press and hold the programming button:
   Connect the 6-PIN Main harness (White connector).
   The LEDs will alternate between BLUE, RED,YELLOW & BLUE/RED flashes.

2. Release the programming button when the LED is BLUE.
   If the BLUE LED is not ON solid disconnect the 6-Pin Main connector and go back to step 1.

3. Insert the required remaining connectors.

4. Turn the key to the ON/RUN position.
   The BLUE LED will turn OFF.
   Wait,
   The BLUE LED will flash rapidly.

5. Turn the ignition to the OFF position.
   The RED LED will turn ON.

6. Turn the key to the ON/RUN position.
   The YELLOW LED will turn ON.
   The RED LED will flash once.

7. Turn the ignition to the OFF position.
   The YELLOW LED will turn OFF.

8. Turn the key to the ON/RUN position.
   The YELLOW LED will turn ON
   The RED LED will flash once.
   The Red and Yellow LEDs will start flashing alternatively.

9. Turn the ignition to the OFF position.

10. Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector.

11. Use the tool:
    FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
    *Parts required (not included)
    The DCryptor process can take up to 15 minutes.

12. AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 6-Pin (Main- Harness) or the 4-pins (Data-Link) connector and after all the remaining connector.

The module is now programmed.
REMOTE STARTER
Test the remote starter.

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

Notice: Updated Firmware and Installation Guides Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Copyright © 2006-2019, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT

Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE

www.fortinbypass.com

WEB UPDATE

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>