VIDEX VL-F2 LED Floodlight User Manual
- June 13, 2024
- VIDEX
Table of Contents
**VIDEX VL-F2 LED Floodlight User Manual
**
LED FLOODLIGHT
-
Rated voltage, frequency.
-
Rated plover
-
Rated luminous fix.
-
Norninaluseful luminous flux (360°),
-
Energy efficiency class.
-
Color temperature.
-
Not compatible with lighting dimmer.
-
Color Rendering Index.
-
Nominal beam angle.
-
Nominal lifetime.
-
Protection against dust and waterjets provided.
-
ON/OFF cycles.
-
Protection against mechanical impacts.
-
Ultraviolet-free.
-
Mercury-free.
-
Product can be stalled and operated n/on 2 surface made of materials which are normally flammable.
-
Working temperature
-
Product meets requirements of EU directives.
-
The minimum distance from the illuminated object.
-
Class . A product in which protection against electric shack s provided ot only by means of basic insulation but also through additional safety measures, .. extra protective circuit to which protective conductor of the fixed feeding inhalation needs to be connected.
-
LED light source cannot be replaced.
-
Replace the defective lamp cover immediately. Don’t use the product if the outer bulb s cracked or broken.
-
For outdoor use only.
-
Danger of eclectic shock.
ENVIRONMENTAL PROTECTION
- Pursuant to the provisions of the WEEE Act, itis forbiddento put waste equipment marked with the symbol of a crossed bin tagether with other waste. The user, wishing to gastric o electronic and electrical equipment, is obliged to retun it to a waste equipment collection paint. There are no hazardous components in the equipment that have a particularly negative impact on the environment and human health.
PRODUCT’S PURPOSE AND APPLICATION This product i intended for lumination of the pubic o industrial space, 150 ofthe warehouses and buiding structures.
INSTALLATION INSTRUCTIONS
Installation must be performed by an electrician or authorized person. Read the user’s manual prior installation. Any assembly or maintenance activities to be done with power supply OFF. To install the LED floodlight on the surface:
-
Dril 2 holes in the surface and ix the dowels in the holes (not included) (Fig1):
-
Connect the L, N, wires to the – 230V, 50 / 60Hz mains using an outdoor junction box and screw terminal (Fig.2).The ends of the wires must be insulated to the appropriate length:
-
Fix LED floodlight with screws (Fig 3}
-
Adjust the ti tt angle and tighten the bolt on the bracket (Fig. 4. Before the fists tis necessary overfly that mechanical installation and electric connection are cared out correctly.
Not included
FUNCTIONAL CHARACTERISTICS
This product should be used outdoor only.
MAINTENANCE & SAFETY INSTRUCTIONS
Any maintenance work must be performed when the power supply is cut OFF and
the product has cooled down. Clean only with soft and dry cloths. Do not use
chemical detergents. Do not cover the product. Ensure free air access. LED
floodlight may heat up to a high temperature. Product can only be supplied by
rated voltage or voltage within the range provided. It forbidden to use the
product with the damaged electric wiring or places of connections. ATTENTION!
Do not look direct at LED light beam. Its forbidden to use the product with
damaged cover. Product must ot be used in unfavorable conditions, eg.
vibrations, explosive air atmosphere, fumes, o clerical fumes, etc. Product
with non-replaceable ight source of LED type. Product cannot be fixed if the
light source becomes damaged. Used or damaged product should be disposed of in
accordance with applicable regulations.
Falure to follow these instructions may result in e, fir, burns, electrical shock, physicalnjury and other material and non-material image. Allegro 0pt Sp. 2. 0. shall not be responsibe for any damage resulting from the failue to follow these instructions. The manufacturer reserves the rght to make changes inthe manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>