ROADSAFE BT016 Auxiliary Battery Tray Instructions
- June 13, 2024
- ROADSAFE
Table of Contents
ROADSAFE BT016 Auxiliary Battery Tray
Product Information
- Vehicle: Mitsubishi Triton
- Model Year: 2007 – 2013
- Product: Auxiliary Battery Tray
- Product Code: BT016
Battery Tray Details: Fits two batteries: N70zz 12-inch case and N50zz 10-inch case.
Included Components
- 1 x 6mm bolt, nut & washers
- 2 x 4mm bolt
- 1 x 4mm bolt & nut
- 1 x Support Bracket
- 1 x Hold Down with J Hooks
Product Usage Instructions
- Battery Tray fits into the front of the right-hand driver side of the vehicle under the bonnet.
- Remove the existing battery tray.
- Sit the new tray into place. There is a support bracket to the engine side on the underneath of the tray and one to the right-front corner, which has an earth wire leading to it. Place 2 x 4mm bolts in the threaded holes.
- The tray also has a support bracket that bolts to the firewall using the existing bolt in the firewall. Fix the bracket to the tray using the 4mm bolt & nut.
- There is a support bracket under the tray and a hole in the skirt. Place 1 x 6mm bolt, washers, and nut through the bracket and hole, and tighten all nuts & bolts.
- Sit batteries in the tray.
- Fit battery hold downs and tighten.
For further assistance, please contact:
A division of Specialist Wholesalers Pty. Ltd.
ABN 64 163 280 279
VIC PH: 03 8687 1700 | QLD PH: 07 3737 7420
Email: sales@roadsafe.com.au
INSTALLATION
- 1. Battery Tray fits into the front of the right-hand driver side of the vehicle under the bonnet.
- Once you remove existing battery tray, sit new tray into place. There is a support bracket to the engine side on the underneath of the tray and one to the right-front corner. It has an earth wire leading to it. Place 2 x 4mm bolts in the threaded holes.
- The tray also has a support bracket that bolts to the firewall using the existing bolt in the firewall. Fix the bracket to the tray using the 4mm bolt & nut.
- There is a support bracket under the tray and hole in the skirt. Place 1 x 6mm bolt, washers and nut through bracket and hole and tighten all nuts & bolts.
- Sit batteries in tray, fit battery hold downs and tighten.
A division of Specialist Wholesalers Pty. Ltd. ABN 64 163 280 279
VIC PH: 03 8687 1700 | QLD PH: 07 3737 7420 | Email:
sales@roadsafe.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>