REHAU 13280061001 NEA SMART 2.0 Room Probe User Guide
- October 28, 2023
- REHAU
Table of Contents
REHAU 13280061001 NEA SMART 2.0 Room Probe
Quick install
- (A) 13280061001, 13280061002, 13280061003,13280081001, 13280081002, 13280081003
- (B) 13280141001, 13280141002, 13280141003,13280161001, 13280161002, 13280161003
Safety Instructions and Product Conformity
Risk of life through electrical shock! The electrical installation must follow the applicable national standards and guidelines as well as any specific requirements of your local energy supplier. These instructions are intended for use by a qualified person who is holding an official certificate in one of the following professions:
Electrician or electronics engineer
Always read the instructions prior to commencing the installation. Connection to the final power supply must only be carried out after the installation is complete.Hereby, REHAU Industries SE & Co. KG declares that the radio equipment type Room Probe (mat. no. see B) is in compliance with EU directive 2014/53/EU and UK regulation UK: 2017 No. 1206. The full text of the EU and UK declaration of conformity is available at the following internet address: www.rehau.com/neasmart2
System Overview
Scope of Delivery
Only wireless version
Installation
- Bus (ZOBUS)
- Wireless
Remote Sensor
Set up external sensor at installer menu (HTML WIZARD)
Assignment of room sensor (without display) to room zone 
Delete Pairing Sequence
Error Messages
Blink codes
- Ready for pairing
- Pairing successful
- Pairing failed
- Wake up after power up
- Still alive (after pushing the button short)
- Battery low (blink every 5 minutes)
- Connection to Base lost (blink every 15 minutes)
- Sensor error (internal and/or external)
- Humidity probe error
- General error (antifreeze, dew point, open window)
Additional information
http://www.rehau.com/neasmart2
This document is protected by copyright. All rights based on this are reserved. No part of this publication may be translated, reproduced or transmitted in any form or by any similar means, electronic or mechanical, photocopying, recording or otherwise, or stored in a data retrieval system.Our verbal and written advice with regard to usage is based on years of experience and standardised assumptions and is provided to the best of our knowledge. The intended use of REHAU products is described comprehensively in the technical product information. The latest version can be viewed at www.rehau.com/TI. We have no control over the application, use or processing of the products. Responsibility for these activities therefore remains entirely with the respective user/processor.Where claims for liability nonetheless arise, they shall be governed exclusively according to our terms and conditions, available at www.rehau.com/conditions, insofar as nothing else has been agreed upon with REHAU in writing. This shall also apply for all warranty claims, with the warranty applying to the consistent quality of our products in accordance with our specifications. Subject to technical changes.
954646 09.2022 © REHAU Industries SE & Co. KG, Rheniumhaus, 95111 Rehau
References
- Conditions of Sale worldwide | REHAU
- REHAU TI Portal - Find specific technical information
- REHAU North America
- REHAU Group | Engineering progress – Enhancing lives
- Conditions of Sale worldwide | REHAU
- NEA SMART 2.0 Manager | REHAU
- REHAU TI Portal - Find specific technical information
- Szállítási és Fizetési Feltételek