Shenzhen Shisuo Intelligent Electronic Technology S9 Wireless Lavalier Microphone Instruction Manual

Shenzhen Shisuo Intelligent Electronic Technology S9 Wireless Lavalier

Microphone

Product Description

This product is a smart wireless lavalier microphone, which can provide professional-level recording live output. Plug and play, no APP required. Multiple uses: It can be used in web live broadcast, video Vlog shooting, program interviews, interview recording, video teaching, conference speeches, Bluetooth KTV accompaniment and other occasions. The wireless microphone consists of two parts, the transmitter and the receiver (as Shown In the Tigure below)

• (Microphone Transmitter)
• (Microphone Receive)

Function introduction

Function introduction

1. Power key: Long press the 3-second switch
   • Click the noise reduction switch
   • Double Click Mute
2. Reverberation key: Short press reverb switch
3. Mute indicator: Mute turn on always-on, mute turn on, and off
4. Reverberation indicator: The reverb is turned on and always on. The REVERB is turned off and extinguished
5. Connecting light: Connected to Constant light, not connected to flicker
6. charging indicator: Red when charged, green when fully charged
7. 3.5 audio ports: Wiretaps/Auricular Gyrus
8. TYPE-C interface: Charging

Pairings: Power on. One second to auto-match Two-way communication: Listening to music and talking.

Transmitter function introduction

1. Power key: Long press the 3-second switch
   • Double Click Mute
2. Bonding: Short press volume, long press switch Bluetooth
3. Key reduction Snort press volume-, long press switch edge
4. Noise reduction lamp: Noise reduction turn on bright, noise reduction turn off off off
5. Bluetooth indicator: It’s connected. It’s on, Unconnected flicker, Bluetooth off, off, off
6. Connecting light: Connected to Constant light, not connected to flicker
7. charging indicator: Red when charged, green when fully charged
8. 3.5 audio ports: Wiretaps
9. TYPE-C interface: Otg live/Charging

• Pairing Power on  One second to auto-match
• Bluetooth accompaniment: Connect to play accompaniment (device name: S9)
• Listening function: You can hear yourself through your headphones
• BUILI-IN DSP reverberation effect: Real REVERB, not dualism
• Automatic shutdown function: MIC TERMINAL AUTOMATIC SHUTDOWN AFIER b minutes without connection

Product Parameters

• Pointing type: omnidirectional
• Frequency range: 2.4G
• Frequency response range: 30HZ-18KHZ
• Transmission distance: >20 meters
• Battery capacity: 300mA
• Charging interface: Type-c charging interface
• Rated input: DC-200mA
• Standard charging time: about 1.5 hour
• Working hours: 5-6 hours
• Working temperature: -10C~45C
• Storage temperature: -20C~60C

Packing List

Packing list content

1. Transmitter
2. Receiver
3. User manual
4. Charging cable*1
   • Mobile phone cable*1
5. Storage box

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>