ROADSAFE BP103 Bonnet Scoop Guard Instruction Manual
- June 13, 2024
- ROADSAFE
Table of Contents
ROADSAFE BP103 Bonnet Scoop Guard
Product Information
Product: Bonnet Scoop Guard
Vehicle: Toyota Land Cruiser 76 / 78 / 79 Series
Part Number: BP103
Product Usage Instructions
- Tools Required: Body clip removal tool
- Remove the plastic/rubber under the bonnet duct.
- Apply Sikaflex to the inner folded faces of the stainless guard.
- Place the guard on the inside of the bonnet scoop.
- Ensure the guard is parallel to the center section of the scoop, even if the scoop is not 100% straight and dips away at the ends.
- Use tape to hold things in place while the Sikaflex cures, following the instructions provided.
- Once the Sikaflex is cured, refit the inner duct under the bonnet.
Contact Information:
Roadsafe.com.au
A division of Specialist Wholesalers Pty. Ltd.
ABN 64 163 280 279
VIC PH: 03 8687 1700 | QLD PH: 07 3737 7420
Email: sales@roadsafe.com.au
VEHICLE Toyota Land Cruiser 76 / 78 / 79 Series
PRODUCT Bonnet Scoop Guard
PART NUMBER BP103
FITTING INSTRUCTIONS
- Remove the plastic/rubber under the bonnet duct.
- Apply Sikaflex to the inner folded faces of the stainless guard.
- Place guard on inside of bonnet scoop.
- The scoop is not 100% straight: it dips away at the ends. Ensure the guard is parallel to the center section of the scoop.
- Have tape to hold things in place while the Sikaflex cures as per instructions.
- Refit the inner duct under the bonnet once cured.
roadsafe.com.au
A division of Specialist Wholesalers Pty. Ltd. ABN 64 163 280 279
roadsafe.com.au VIC PH: 03 8687 1700 | QLD PH: 07
3737 7420 | Email: sales@roadsafe.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>