FORTIN 77331 EVO-ONE Chevrolet Trax 2019 Push to Start Remote Starters and Alarm Systems Installation Guide

FORTIN 77331 EVO-ONE Chevrolet Trax 2019 Push to Start Remote Starters

and Alarm Systems

Product Information

The THAR-GM6 is a vehicle immobilizer bypass module designed for Buick Encore and Chevrolet Trax vehicles with push-to-start functionality. It is compatible with models from 2017 to 2021. The module allows for features such as lock/unlock, arm/disarm,  trunk control, RAP disable, tachometer, heated seats, door status, trunk status, hand-brake status, foot-brake status, and OEM remote monitoring.

INSTALLATION

THAR-GM6 THARNESS INSTALLATION ADDENDUM – SUGGESTED WIRING CONFIGURATION

INSTALLATION HARNAIS THAR-GM6 ADDENDA – SCHÉMA DE BRANCHEMENT SUGGÉRÉ

Vehicle functions supported in this diagram (functional if equipped) |

VEHICLE VEHICULES

| | USH START

YEARS

|

Immobilizer bypass Nontournament d’immobilisateur

|

Lock

| Unlock| Arm| Disarm| Trunk (open)| RAP Disable| Tachometer| Heated Seats| Door Status| Trunk Status| Hand-Brake Status| Foot-Brake Status| OEM Remote Monitoring
BUICK| | | | | | | | | | | | | | | |
Encore| Push-To-Start| 2017-2020| •| •| •| •| •| •| •| •| •| •| •| •| •| •
CHEVROLET| | | | | | | | | | | | | | | |
Trax| Push-To-Start| 2017-2021| •| •| •| •| •| •| •| •| •| •| •| •| •| •
BYPASS FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEMENT| To add the firmware version and the options, use the

FLASH LINK UPDATER or FLASH LINK MOBILE tool,

sold separately. les options, FLASH LINK UPDATER

FLASH LINK MOBILE ,

---|---
70.| [ 45 ]
| MINIMUM

| Program bypass option:| UNIT OPTION OPTION UNITE| DESCRIPTION
---|---|---|---
C1| OEM Remote status (Lock/Unlock) monitoring

IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN

D’UN CONTACT DE CAPOT FONCTIONNEL A11 OFF NON Hood trigger (Output Status).

D6

• Push-to-Start
• Push-to-Start

ATTENTION

DATE: XX-XX

• OFF
• NON
• By default DEACTIVATED
• ON MANUFACTURED MODULES
• OUI BETWEEN: 04/2018 TO 04/2019

Parts required (Not included): 1X THAR-GM6

 INSTALLATION OBLIGATOIRE

• HOOD

• PIN

• CONTACT

• HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) A11

• MUST BE INSTALLED IF THE VEHICLE CAN BE

• REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

• STATUT DE CAPOT : LE CONTACT DE CAPOT (INCLUS),

• SECURITY STICKER
  

• AUTOCOLLANT DE
  

• Notice: the installation of safety

• elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.

• THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
  
  

DESCRIPTION

• Program remote starter option for R.S. OEM REMOTE STAND ALONE
• Enable
• Press 3x Lock to remote start with the OEM remote.

BCM

AUTOMATIC TRANSMISSION WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE 1/2

1. Remove the battery from the OEM remote.
2. Place the OEM remote in the front cup holder in the center console.
   Refer to vehicle user guide for Keyport location

Press and hold Insert the programming button:
Insert the 6-Pin Main connector

The LEDs will alternate between BLUE, RED, YELLOW  & BLUE/RED flashes

Release the programming button when the LED is YELLOW

If the LED is not solid YELLOW disconnect the 6-Pin connector (Main-Harness) and go back to step 1.

Insert the required remaining ,connectors

Press and release the programming button five (5x) times.

The YELLOW LED will flash 5 times each second.

WAIT for the YELLOW LED to turn ON solidi.

Open the driver door.

Press the foot-brake pedal.
Press the Push-to-Start button until the engine start.
Release the foot-brake pedal.

Press the Push-to-Start button until the engine turn OFF.

Close and open the driver door.

Press the foot-brake pedal.

Press the Push-to-Start button until the engine start.

Release the foot-brake pedal.

The BLUE LED will turn ON
The BLUE LED will turn OFF.
The RED LED will turn OFF
The YELLOW LED will flash rapidly
The BLUE LED will turn ON.
The BLUE LED will flash rapidly
Press the Push-to-Start button until the engine turn OFF.
The BLUE LED will flash slowly
Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector.

Microsoft Windows Computer with Internet connection
Ordinator Microsoft Windows avec connection Internet
Smartphone (Internet provider charges may apply)

Use the tool

FLASH LINK UPDATER or
FLASH LINK MOBILE
to visit the Cryptor menu

AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 6-Pin (Main- Harness) or the 4-pins (Data-Link) connector and after all the remaining connector.

PROCEDURE
The module is now programmed.

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE
MODULE FOR THE REMOTE STARTER PROGRAMMING

REMOTE STARTER FUNCTIONNALITY

All doors must be closed.
Remote start the vehicle.

Press the Unlock button of the remote car starter

Enter the vehicle with the Intelligent Access Key
The vehicle can now be  put in to gear and driven.

If the vehicle is not unlocked the module will shut down the remote-starter and the vehicle as soon as any door is opened.
Notice: Updated Firmware and Installation Guides
Updated fi rewire and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rewire and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualia edh technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
www.fortinbypass.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>