FORTIN 2013 Volkswagen Golf Regular Key Remote Starters and Alarm Systems Installation Guide

FORTIN 2013 Volkswagen Golf Regular Key Remote Starters and Alarm Systems Installation Guide

| Vehicle functions supported in this diagram (functional if equipped)
---|---
Key Control| T-Harness available (sold separately| Lock| Unlock| Arm| Disarm| Hazard Lights| Tachometer| AUX.1Comfort Group| Door Status| Trunk Status| Hood Status*| Hand-Brake Status| Foot-Brake Status| OEM Remote monitoring|
VEHICLE| | YEARS| Heated seats| Rear defrost|
VOLKSWAGEN
Golf-R| Push-to-Start| 2015-2018| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •|
 | FIRMWARE VERSIO| To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately. Pour ajoite la version logically et les options,
---|---|---
67.[04] MINIMUM
| Program bypass option:| UNIT OPTION OPTION UNITE| DESCRIPTION
C1| OEM Remote status (Lock/Unlock) monitoring
Program bypass option
(If equiped with OEM alarm):| D2| Unlock before / Lock after (Disarm OEM alarm)
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:| A11| OFF NON| Hood trigger (Output Status)
| Parts required ( Not included)
1x TB-VW
1x 7.5 Amp Fuse
1x Diode (Manual transmission)
MANDATORY INSTAL
* HOOD PIN
| HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF| A11| OFF NON| Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.| HIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE ERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

1. Ignition Harness
2. Ignition barrel
3. BCM
4. OBD-II connector

MANUAL TRANSMISSION

AUTOMATIC TRANSMISSION WIRING CONNECTION

MANUAL TRANSMISSION WIRING CONNECTION

DCRYPTOR PROGRAMMING PROCEDURE

Parts required (not included)

FLASH LINK UPDATER
FLASH LINK MANAGER
SOFTWARE | PROGRAMME
Microsoft Windows Computer with Internet connection
OR
OU
FLASH LINK MOBILE
FLASH LINK MOBILE APP
****SOFTWARE | PROGRAMME Smartphone Android or iOS with Internet connection (Internet provider charges may apply)

1. WARNING: Close and open the driver door.

2. 
   Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector).

3. Release the programming button when the Blue LED is ON.
   If the LED is not solid BLUE disconnect the 4-PIN Data-link harness (Black connector) and go back to step1.

4. 
   Connect the required remaining harnesses.

5. 
   Turn the key to the Ignition ON/RUN position.
   Wait,
   >The BLUE LED will flash rapidly.

6. 
   Release the programming button
   CONTINUED NEXT PAGE

7. WAIT
   this processe may take up to 15 minutes
   
   Wait, do not touch the vehicle or the module.

   The BLUE, RED and YELLOW LEDs will rapidly alternate.
   The BLUE, RED and YELLOW LEDs will rapidly alternate.
   Wait
   the RED LED to turn ON.

8. Wait,
   > Wait for the RED and YELLOW LEDs to slowly alternate.
   If the RED LED flashes slowly, the programming has failed, go back to step1 and start the programming over.

9. 
   Turn the key to the OFF position.

10. 
    Disconnect all the connectors and after the Data-Link (4-pins) connector.

11. Use the tool:
    FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DC ryp tor menu.
    FLASH LINK UPDATER**
    Microsoft Windows Computer with Internet connection
    Ordinateur Microsoft Windows avec connection Internet
    Parts required (not included)
    FLASH LINK MANAGER*
    SOFTWARE | PROGRAMME
    OR
    OU
    **

12. 
    AFTER DCRYPTOR PROGRAMMING COMPLETED
    Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.
    KEY BYPASS PROGRAMMING
    AFTER HAVING PLUGGED IN THE DATA-LINK CONNECTOR AND THE REQUIRED REMAINING HARNESSES:
    

13. _
    > The RED and YELLOW LEDs _stay OFF.
    The module is now programmed.
    **OR
    OU

**The RED and YELLOW LEDs turn ON.
CONTINUED BELOW

14. 
    Turn the key to the Ignition ON/RUN position.

    The YELLOW LED will turn OFF
    The RED and YELLOW LEDs will alternate.

15. Turn the key to the OFF position.

16. 
    Disconnect all the connectors and after the Data-Link (4-pins) connector.

17. Microsoft Windows Computer with Internet connection*
    
    TRY AGAIN
    RECOMMENCER
    Use the tool:
    FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCrypto menu.
    SEND DATAENVOYER DONNÉES
    KEY BYPASS PROGRAMMING PROCEDURE 4/4

18. 
    AFTER DCRYPTOR PROGRAMMING COMPLETED
    Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.
    The module is now programmed. REMOTE STARTER / ALARM VERIFICATION PROCEDURE | PROCÉDURE DE VÉRIFICATION DU DÉMARREUR À DISTANCE / ALARME

NOTE :
****IF PROGRAMMING IS INTERRUPTED DURING THE PROCESS, SUCH AS A MODULE IS DISCONNECTED OR BY TURNING OFF THE IGNITION WITH THE KEY, IT IS POSSIBLE THAT THE VEHICLE WILL NO LONGER START NORMALLY, YOU MUST DISCONNECT AND RECONNECT THE VEHICLE BATTERY TO CORRECT THE SITUATION.

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

FORTINⓇ
HARDWARE VERSION FIRMWARE VERSION
Date: xx-xx
EVO-ALL
INTERFACE MODULE
PATENTS PENDING US: 2007-228827-A1
Made in Canada
www.fortinbypass.com
Module label

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT

Tél: 514-255-HELP (4357)
1-877-336-7797

www.fortinbypass.com

E WEB UPDATE | MISE À JOUR INTERNET

Documents / Resources

| FORTIN 2013 Volkswagen Golf Regular Key Remote Starters and Alarm Systems [pdf] Installation Guide
2013 Volkswagen Golf Regular Key Remote Starters and Alarm Systems, 2013 Volkswagen, Golf Regular Key Remote Starters and Alarm Systems, Key Remote Starters and Alarm Systems, Remote Starters and Alarm Systems, Starters and Alarm Systems, Alarm Systems, Systems
---|---
| FORTIN 2013 Volkswagen Golf Regular Key Remote Starters and Alarm Systems [pdf] Installation Guide
2013 Volkswagen Golf Regular Key Remote Starters and Alarm Systems, 2013 Volkswagen, Golf Regular Key Remote Starters and Alarm Systems, Key Remote Starters and Alarm Systems, Alarm Systems, Systems
| FORTIN 2013 Volkswagen Golf Regular Key Remote Starters and Alarm Systems [pdf] Installation Guide
2013 Volkswagen Golf Regular Key Remote Starters and Alarm Systems, 2013 Volkswagen Golf, Regular Key Remote Starters and Alarm Systems, Remote Starters and Alarm Systems, Starters and Alarm Systems, Alarm Systems, Systems
| FORTIN 2013 Volkswagen Golf Regular Key Remote Starters and Alarm Systems [pdf] Installation Guide
2013 Volkswagen Golf Regular Key Remote Starters and Alarm Systems, 2013, Volkswagen Golf Regular Key Remote Starters and Alarm Systems, Regular Key Remote Starters and Alarm Systems, Key Remote Starters and Alarm Systems, Starters and Alarm Systems, Alarm Systems, Systems

References

• Over
• Remote Car Starters, Car Alarms, Immobilizer Bypass and Connected Vehicle Solutions | Fortin Electronic Systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>