FORTIN 62081 Fiat 500L 2015 Standard Key Remote Starters and Alarm Systems Installation Guide

REV.: 20211020
Guide # 62081
ADDENDUM – SUGGESTED WIRING CONFIGURATION
REGULAR INSTALLATION VEHICLE………… YEARS

Vehicle functions supported in this diagram (functional if equipped) 
FIAT

FIRMWARE VERSION To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
NOTES
OPTION 1
WITH OEM ALARM FUNCTIONAL AND OEM REMOTE FUNCTIONAL :
The vehicle’s OEM alarm can only be disarmed through the OEM remote.
When the vehicle is remote started, if the remote starters remote is used to unlock the doors, the engine will shut off as soon as a door is opened and the vehicle will have to be started normally with the key, the alarm will be disabled.
OPTION 2
WITH OEM ALARM NOT FUNCTIONAL AND OEM REMOTE NOT FUNCTIONAL :
The vehicle’s OEM alarm can only be disarmed through the OEM remote.
Remove the battery from the vehicle OEM remote to cancel the vehicle OEM alarm system’s and protect the vehicle with the integreted alarm system’s of the EVO-ALL.
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

| Hood trigger (Output Status).
---|---
| Parts required (Not included)
1x Fuse

MANDATORY INSTALL

• HOOD PIN CONTACT	HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
  Notice: the installation of safety elements are mandatory. The hood pin  is

  an essential security element and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
OPTION 1 Program bypass option:

Program bypass option:

Program bypass option

Program bypass option IF OEM FUNCTIONAL:

DESCRIPTION

WIRING CONNECTION

**

**DCRYPTOR PROGRAMMING PROCEDURE

Parts required (not included)

| FLASH LINK UPDATER,
---|---
| FLASH LINK MANAGER SOFTWARE | PROGRAMME
| Microsoft Windows Computer with Internet connection

OR

| FLASH LINK MOBILE
---|---
| FLASH LINK MOBILE APP
| Smartphone Android or iOS with Internet connection (Internet provider charges may apply)

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.

| Press and hold the Insert programming button: the 4-Pin (Data-Link) connector.
The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.
---|---
| Release the programming button when the LED is BLUE.
If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.

| Insert the required remaining connectors.
| Turn the key to the
Ignition ON/RUN position.
The BLUE LED will turn OFF. WAIT,
The BLUE LED will flash.
| Turn the key to the OFF position.
The BLUE LED will turn OFF.
The RED LED will turn ON.

KEY BYPASS PROGRAMMING PROCEDURE 2/2

| Turn the key to the Ignition ON/RUN position.
The YELLOW LED will turn ON.
The RED LED will turn OFF.
The RED LED will turn ON.
---|---
| Repeat this process approximately 10 times.
Turn the key to the OFF position.
Turn the key to the Ignition ON/RUN position,
| UNTIL:
AT IGNITION OFF:
The RED and the YELLOW LED’s alternate.
| Disconnect all the connectors and after the Data-Link (4-pins) connector.
*| Use the tool:
FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
Parts required (not included)
| AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.
**| The module is now programmed.
---|---
****| REMOTE STARTER / ALARM VERIFICATION PROCEDURE
Test the remote starter. Remote start the vehicle.

REMOTE STARTER FUNCTIONALITY

OPTION 1
OEM REMOTE FUNCTIONAL :
WITH OEM ALARM FUNCTIONAL AND OEM REMOTE FUNCTIONAL :

• The vehicle’s OEM alarm can only be disarmed through the OEM remote.
• When the vehicle is remote started, if the remote starters remote is used to unlock the doors, the engine will shut off as soon as a door is opened and the vehicle will have to be started normally with the key, the alarm will be disabled.

OPTION 2
REMOTE STARTER (OEM REMOTE NOT FUNCTIONAL) :

| All doors must be closed.
---|---
START| Remote start the vehicle with the remote starter remote.
| Unlock the doors with the remote starter remote.
| Turn the Ignition to the ON/RUN position.
| The vehicle can now be put in to gear and driven.

WITH OEM ALARM NOT FUNCTIONAL AND OEM REMOTE NOT FUNCTIONAL :

• The vehicle’s OEM alarm can only be disarmed through the OEM remote.

  ---

• Remove the battery from the vehicle’s OEM remote to cancel the vehicle OEM alarm system’s and protect the vehicle with the integrated alarm system of the EVO-ALL.

WITHOUT OEM ALARM – OEM REMOTE FUNCTIONAL :

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
** WARNING**
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Such: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
WEB UPDATE
www.fortinbypass.com
Copyright © 2006-2018, FORTIN AUTO RADIO INC
ALL RIGHTS RESERVED PATENT PENDING

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>